Amigurumi Peacock Free Crochet Pattern

by Posted on

Hello amigurumi lovers and beautiful visitors, I wanted to share the free amigurumi patterns for you here. In my article I will share 1 pattern and how to make it for you. At the end of my article, I will share amigurumi patterns that can generate ideas for you.

You will need:

  • yarn of different colors: several shades of blue, sandy yellow, a little white for the eyes, stuffing,
  • safety eyes,
  • tapestry needle,
  • appropriate size hook.

Knitted toy size:
Height – 20 cm

Symbols:
KR – a circular row
RLS – a single crochet column
PSN – a half-column with a crochet
CH – a double crochet column
С2Н – a double crochet column
decrease. RLS – decrease, knit two columns together
vp – air loop
p. – loop
connection. Art. – connecting column
* … * – the repeat section is marked with asterisks
(..) – the total number of loops is indicated in brackets

Spot around the eye (2 pcs.)
Crochet 4.5 mm and white yarn of the color of the seashell 6 sc in the ring (6 loops)
KR1: 1 sc, (1 sc, 1 dc, 1 ch, 1 dc, 1 sc) in the next . p., 1 RLS, 1 conn. Art. (7 loops)
Close the last loop.

Head and neck
With a 4.5 mm crochet hook and ocean blue yarn, knit an amigurumi ring, 6 sc in a ring. (6 sts)
KR1: 2 sc in each st to end (12 sts)
KR2: *1 sc, 2 sc in the next. *, repeat to the end (18 loops)
KR3: * 2 sc, 2 sc in the next. *, repeat to the end (24 loops)
KR4: * 3 sc, 2 sc in the next. *, rep to end (30 sts)
KP5-9: 1 sc in each st to end.
DC10: *3 sc, dec. Sc*, repeat to end (24 sts)
Insert safety eyes into the center of the speck, then insert between KP7 and KP8 of the head, about 9 sts apart, so that the pointed part of the speck is directed towards the back of the head.
KR11: *2 sc, decrease. RLS *, repeat to the end (18 loops)
CR12: *1 sc, decrease. Sc*, rep to end (12 sts)
KR13-16: 1 sc in each st to end.
KR17: *3 sc, 2 sc next. *, repeat to the end (15 loops)
KR18: * 4 sc, 2 sc in the next. *, repeat to the end (18 loops)
KR19: 1 sc in each p. to the end.
KR20: *5 sc, 2 sc next. *, repeat to the end (21 loops)
KR21: Repeat KR19. Close the last loop.

Beak
Crochet 4.5 mm and sand-yellow yarn to tie an amigurumi ring, 3 sc in the ring. 3 sts
KR1: 2 SC in each st to the end (6 sts)
KR2: 1 SC in each st to the end.
Row 3: *1 sc, 2 sc next. *, repeat to the end (9 loops)
Row 4: * 2 sc, 2 sc in the next. *, repeat to the end (12 loops)
Close the last loop.

Feather tip on head (3 pcs.)
Using 4.5 mm crochet hook and ocean blue yarn, knit an amigurumi ring, 6 sc in a ring (6 loops)
KR1: 1 sc in each st to the end.
Close the last loop, leaving a tail of 15 cm.

Feather leg on head (3 pcs.)
Crochet 4.5 mm and dolphin color yarn 6 in (6 loops)
Row 1: Starting from the second loop from the hook, 1 sc in each loop to the end (5 loops)
Cast off the last loop, leaving a tail of 15 cm.

Body
With 4.5 mm crochet hook and ocean blue yarn, work an amigurumi ring, 6 sc in a ring (6 sts)
KP1-7: Repeat KP 1-7 head and neck (30 sts)
KP8: *3 sc, dec. Sc *, repeat to the end (24 loops)
Take the blue yarn of the color of the dolphin
KR9-13: 1 sc in each loop to the end.
Change to sky blue yarn
KR14-17: 1 sc in each st to end.
CR18: *2 sc, decrease. RLS *, repeat to the end (18 loops)
Fill
KR19: * 1 RLS, decreasing. Sc *, repeat to the end (12 loops)
KR20: decrease. Sc to end (6 sts)
Cut yarn, use tapestry needle to pull tail through remaining 6 sts and bind off.

Wing (2 pcs.)
Crochet 4.5 mm and blue dolphin-colored yarn to knit an amigurumi ring, 6 sc in a ring (6 loops)
KR1: 2 sc in each st to the end (12 loops)
Kr2: 4 sc, 2 dc track. p., (1 CH, 1 C2H) in the next. p., (1 C2H, 1 CH) in the next p., 2 PSN in the next. p., 4 sc, 1 conn. Art. in a trace. p. (16 loops)
Close the last loop.

Part of the tail (5 pcs.) With a 4.5 mm crochet
hook and blue yarn, knit an amigurumi ring, 6 sc in a ring (6 loops)
. to end. Close the last p.
Please note: you need to hide the ends of the first parts of the tail, but leave at the last part and continue the tail as follows:

[adrotate group=»5″]

Tail
Crochet 4.5 mm and blue yarn from the last part of the tail:
12 sc in a circle of this part, 6 sc in each of the next three parts of the tail, 12 sc in the last part of the tail, 6 sc in each of the next three parts (60 loops)
KR1: 1 sc in each st to end.
CR2: *3 sc, decrease. Sc*, rep to end (48 sts)
KR3: *6 sc, dec. Sc*, repeat to end (42 sts)
KP4: repeat KP 1
KP5: *5 sc, dec. Sc*, repeat to end (36 sts)
Change to dolphin yarn
KP6: repeat KP 1
KP7: *4 sc, dec. Sc*, repeat to end (30 sts)
KP8: repeat KP 1
KP9: *3 sc, dec. Sc*, rep to end (24 sts)
KR10-11: 1 sc in each st to end.
CR12: *2 sc, decrease. Sc *, repeat to the end (18 loops)
KR13: * 1 sc, decrease. Sc *, repeat to the end (12 loops)
KR14: decrease. Sc to end (6 sts)
Cut yarn, use tapestry needle to pull tail through remaining 6 sts and bind off.

Front tail feather (5 pcs.)
Crochet 4.5 mm and ocean blue yarn, knit an amigurumi ring, 6 sc in a ring (6 loops)
Change to dolphin color
KR1: 2 sc in each stitch to the end (12 loops)
Change sandy yellow yarn
KR2: 4 sc, 2 dc in the next. p., (1 CH, 1 C2H) in the next. p., (1 C2H, 1 CH) in
the next. p., 2 PSN in the next. p, 4 sc, 1 conn.st. in the next p. (16 loops)
Close the last loop.

Rear tail feather (5 pcs.)
With a 4.5 mm crochet hook and sandy yellow yarn, knit according to the wing pattern.

Paws
Crochet 4.5 mm and sand-yellow yarn to tie an amigurumi ring, 6 sc in a ring (6 loops)
KR1: 2 sc in each st to the end (12 loops)
Kr2: * 1 sc, 2 sc in the next. *, repeat to the end (18 loops)
KR3: behind the front walls of the loops, * (1 conn. st., 4 ch, 1 conn. st.) in each of the 3 next. loops**, 1 conn. Art. in each of the tracks. 2 sts, repeat from * to ** 1 time, 8 sc
KR4: behind the back walls of the loops of the previous KR, (1 sc, decrease sc) to the end (12 loops)
Kr5: decrease. Sc to end (6 sts)
Cut yarn, use tapestry needle to pull tail through remaining 6 sts and bind off.

Assembling a knitted toy
1) Stuff the head and neck. Sew to the top front of the body. Sew spots around the eyes to the head along the edge. Fill the beak and sew it between the spots.

Helpful Hint: Sew on the patches, wings and feathers with small straight stitches between the V-stitches of the last CRs for a neat seam.

2) Fold each leg of the feather in half and use tails to sew the edges together. Thread the tail from each feather tip into a tapestry needle and thread through the 6 remaining stitches, insert the end of each feather stem into the feather tip and pull tight towards the hole. Sew a couple of stitches through the leg to secure. Close the last loop. Sew three feather tips at the base and sew them to the center of the head.
3) Sew the wings on both sides of the body with the pointed part back.
4) Sew the legs to the base of the body with the toes forward.

5) Pin the front tail feather to each part of the tail and sew the edges in place, sewing through the feather and both layers of the tail, and sew each suitable back tail feather to the back without sewing through both layers. Sew together the tops of the tail feathers. Sew the base of the tail to the back of the body. Sew through both layers of the tail and into the body from the base to KP 10 until it is securely fastened.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Published by admin