Materials and tools:

• Yarn Pekhorka “Children’s novelty” or Vita Cotton Coco – red
• Vita Cotton Coco – a little white for handles and pompoms
• Alize Softy – white for the beard and edging on the cap
• YarnArt Jeans – brown
• Alize Bella – beige
• Hooks 1.5mm and 2.5mm (for Softy)
• Black beads for eyes
• Needle, scissors
• Synthepukh

Legend:
KA – amigurumi ring
p – row
p – loop
vp – air loop
pr – increase
kill – decrease
sbn – single crochet
ss – connecting column
(…) * – repeat everything written in brackets as many times as written after asterisks

Handles (2 parts)
White yarn:
1p: 4 sbn in KA
2p: 1 sbn, 1 pr, 2 sbn = 5p
3p: 5 sbn
Switch to red:
4p: 2 sbn, 1 pr, 2 sbn = 6p
5p: 3 sbn , 1 pr, 2 sbn = 7p
6-10r: (5 rows) of 7 sbn We
fill it a little, fold it in half and knit 4 sbn for two walls of the handle.

Beard
Knit Softy, hook 2.5 mm:
Dial 11 VP.
1p: in the second loop from the hook: 10 sc, we turn the work
2p: 1 cc, 3 cc, knitting all three of them at the end (knob), that is, we knit 3 double crochets, and only then we knit them together.
So tie 8 times, at the end we make a CC.
Cut the thread, leave the tip for sewing.

Head
We knit with beige yarn, hook 1.5 mm: We
collect 7 VP. We knit on both sides of the chain, forming an oval.
1p: in the second from the hook: 5 sc, in the last loop 3 sc, on the reverse side of the chain: 4 sc, in the first loop, from where 2 sc = 14p
2p: 1 pr, 4 sc, 3 pr, 4 sc, 2 pr = 20p
3p: 1 sbn, 1 pr, 4 sbn, 1 pr, 1 sbn, (1 sbn, 1 pr) * 2, 4 sbn, (1 pr, 1 sbn) * 2 = 26p
4-9r: (6 rows ) 26 sbn
10p each : (1 kill, 11 sbn) * 2 = 24p
11p: (2 sbn, 1 kill) * 6 = 18p
12p: (1 sbn, 1 kill) * 6 = 12p
Stuff, leave the tip for sewing to body.

The legs and body of Santa Claus are knitted in one piece. We start knitting from the legs.

Legs (2 parts)
We start knitting with brown yarn:
1p: 5 sbn in KA
2p: 1 sbn, 1 pr, 3 sbn = 6p
3p: 2 sbn, 1 pr, 3 sbn = 7p
Change the color to red in the last loop:
4p: 3 sbn, 1 pr, 3 sbn = 8p
5p: 4 sbn, 1 pr, 3 sbn = 9p
6p: 9 sbn
Cut the thread.

We knit the second leg in the same way, but we do not cut the thread, but continue to knit the body :
We dial 6 VP, knit 9 sbn along the first leg, 6 sbn along the chain, 9 sbn along the second leg, again 6 sbn along the chain = 30p
This is the first row of the body, we will knit 4 sc, so that the marker is on the side of our toy.
2p: 30 sbn
3p: 1 ave, 14 sbn, 1 ave, 14 sbn = 32p
We switch to brown yarn, knit 2 rows for it:
4-5r: 32 sbn
Red yarn:
6p: (if necessary, make an offset loop) 32 sbn
7 -8p: 32 sbn
9p: 1 kill, 14 sbn, 1 kill, 14 sbn = 30p 10p
: 1 kill, 13 sbn, 1 kill, 13 sbn = 28p
11p: 1 kill, 12 sbn, 1 kill, 12 sbn = 26p
12p: 1 kill, 11 sbn, 1 kill, 10 sbn – we knit the last loop together with the handle!
13p: further 3 sb we knit together with the handle!
We knit 6 sc on the body, again 4 sc together with the handle, 10 sc on the body!
We stuff the body and legs.
14p: (2 sbn, 1 kill) * 6 = 18p
15p: (1 sbn, 1 kill) * 6 = 12p Cut the
thread, fill.

Hat
We begin to knit Softy, hook 2.5 mm:
1p: 22 VP, connect in a ring and knit 22 sb
2p: go to red (change the hook) 22 sb
3-6r: (4 rows) 22 sb
7r: (1 ub , 9 sbn) * 2 = 20p
8-9r: (2 rows) 20 sb each
Further, similar noose in every third row, until there is a minimum of loops:
10p: (1 kill, 8 sbn) * 2 = 18p
11-12p: (2 rows) for 18sbn
13r: (1 kill, 7 sbn) * 2 = 16p
14-15r: (2 rows) 16 sbn
16r: (1 kill, 6 sbn) * 2 = 14p
17-18r: (2 rows ) 14 sbn 19p
each: (1 kill, 5 sbn) * 2 = 12p
20-21p: (2 rows) 12sbn 22p each
: (1 kill, 4 sbn) * 2 = 10p
23-24p: (2 rows) 10 each sbn
25r: (1 kill, 3 sbn) * 2 = 8p
26-27r: (2 rows) 8sc
28r: (1 dec, 2 sc) * 2 =
6p 29-30r: (2 rows) 6 sc Pull
, leave the tip of the thread, use it to pull the cap off a little: we are doing the needle with the thread inward and pull it out from the side in the middle, collect it a little, then pull it back to the crown and fasten it to collect it.

Pompom
White Vita Cotton Coco yarn:
1p: 6 sbn in KA = 6p
2p: 6p = 12p
3p: 12 sb
4p: 6 kill = 6p Pulls and sew
to the cap.

Assembly
Sew the cap to the head.
Sew the head to the body with a thread from the head.
Sew the beard to the head with a beard thread.
We embroider the nose with the thread with which the head was knitted: we make 3 stitches of 3 sbn size, over the beard, then we wrap them with thread, creating volume. We insert and withdraw the thread under the beard, then hide the ends.
We embroider the buckle as desired.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Materials

Loren Natural Cotton rope;
1 piece of White (R001) color rope
1 Red (R003) color rope
1 piece of Black (R004) color rope
1 Yellow (R086) color rope
3 mm crochet hook

Knitting terms

ch: chain (в.п)

mr = Magic ring (KA)

sc: single crochet (c6h)

inc = increase (пр)

dec = decrease (уб)

(sl – st =    connecting post : (cc )

HDC= half doubl : (nhc)

DC = double crochet ( CCH)

Loop :lifting loop   ( п.п.)

Abbreviations

R: Row

Rnd: round

ch: chain

mr = Magic ring

sc: single crochet

inc = increase

dec = decrease

BLO: Back loop only

FLO: Front loop only

( )* 6 = repeat whatever is between the brackets the number of times stated

st, sts : stitch, stitches

Fabrication

1) First of all, we start by pulling 13 chains with our white color rope.

2) Starting with the 4th zinc, we make 8 double handrails. As for the last zinc, we make 10 double handrails in the same loop and turn to the other side of the chain. Then we come to the last zinc by making 8 double handrails, we finish the row by using 5 double handrails to make a loop in the last zinc.

3) We go to the top by pulling 3 chains. We end the row by using 1 double handrail loop for each loop.

4) We go to the top by pulling 3 chains. Let’s make 1 handrail on 8 handrails. then make him double handrail on top of 10 handrails to get 20 handrails in total. Let’s continue to make a single handrail on 8 handrails and let’s get 10 handrails by sinking double handrails on the last 5 handrails and end with using loops.

5) Let’s complete the row by making 1 frequent needle on each handrail.

6) Let’s go to the top row by pulling 3 chains and make 1 double handrail for each loop by sinking into the back of the loops (BLO).

We go on the red color rope.

7) Let’s knit by making 1 frequent needle in each loop for 2 rows.

8) Let’s pull 3 chains and get to the top row and start cutting operations on the front toe of our shoes. There will be 10 combined double handrails by finding the middle loop from the foot end, separating 10 loops from the right and left and cutting the 2 handrails together. We knit the remaining parts of the batten as a frequent needle.

9) We complete this row by making 1 frequent needle for each loop.

10) In the meantime, we make a dense needle until the previous cut and cut the 10 handrails in the middle at the tip and cut the double handrail in 2 pieces and reduce it to 5 loops. We knit the rest as a dense needle.

11) We finished the cutting process, we raise the wrist part by making 1 dense needle to each loop without increasing and decreasing it for 3 rows.

12) Then, we finish the wrist part by making 4 rows of 1 needle per loop with our white thread.

We have completed our pawns, now we will make a black strip.

13) Let’s draw 50 chains with our black rope and make 1 double handrail for each chain. Let’s pull 10 chains with our yellow rope and attach it to the black band as a buckle.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!
All Finished.

You will need:

• Vita Cotton Coco yarn: red and white color
• Alize Softy yarn: white for beard
• YarnArt Jeans yarn: brown
• Alize Bella yarn: beige
• 1.5 mm crochet hook and 2.5 mm for Alize Softy
• Black beads for eyes
• Yellow embroidery floss
• Sewing needle and scissors
• Fiberfill

Abbreviations:
R – row
ch – chain
st – stitch
sl st – slip stitch
sc – single crochet
dc – double crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Arms (make 2)
With white yarn:
R 1: 4 sc in magic ring [4]
R 2: 1 sc, inc, 2 sc [5]
R 3: 5 sc
Change to red yarn:
R 4: 2 sc, inc, 2 sc [6]
R 5: 3 sc, inc, 2 sc [7]
R 6-10: 7 sc (5 rows)
Stuff gently with fiberfill.
Fold the top opening flat and 4 sc through both sides.

Beard
With Alize Softy yarn and 2.5 mm crochet hook.
Make 11 ch.
R 1: from the 2nd ch from hook: 10 sc, turn
R 2: sl st, (3-dc-bobble-stitch) repeat 8 times, sl st
Fasten off and leave a long tail for sewing.

Head
With beige yarn and 1.5 mm crochet hook.
Make 7 ch.
Make an oval, starting from the 2nd ch from hook, work on both sides of the chain.
R 1: from the 2nd ch from hook: 5 sc, 3 sc in last st, turn: 4 sc, inc [14]
R 2: inc, 4 sc, 3 inc, 4 sc, 2 inc [20]
R 3: 1 sc, inc, 4 sc, inc, 1 sc, (1 sc, inc) repeat 2 times, 4 sc, (inc, 1 sc) repeat 2 times [26]
R 4-9: 26 sc (6 rows)
R 10: (dec, 11 sc) repeat 2 times [24]
R 11: (2 sc, dec) repeat 6 times [18]
R 12: (1 sc, dec) repeat 6 times [12]
Stuff with fiberfill.
Fasten off and leave a long tail for sewing.

The legs and body are made as one piece.

Legs (make 2)
With brown yarn:
R 1: 5 sc in magic ring [5]
R 2: 1 sc, inc, 3 sc [6]
R 3: 2 sc, inc, 3 sc [7]
Change to red yarn:
R 4: 3 sc, inc, 3 sc [8]
R 5: 4 sc, inc, 3 dc [9]
R 6: 9 sc
Crochet the second leg, do not fasten off.

Make 6 ch and join with the first leg.

Continue crocheting the body in the round:
R 7: 9 sc on the first leg, 6 sc in 6 ch, 9 sc on the second leg, 6 sc in 6 ch (opposite side) [30]
Crochet additional 4 sc to get the position of the yarn marker in the side of the body.
R 8: 30 sc
R 9: inc, 14 sc, inc, 14 sc [32]
Change to brown yarn:
R 10-11: 32 sc (2 rows)
Change to red yarn:
R 12: (if you need crochet additional 1 sc) 32 sc
R 13-14: 32 sc (2 rows)
R 15: dec, 14 sc, dec, 14 sc [30]
R 16: dec, 13 sc, dec, 13 sc [28]
R 17: dec, 12 sc, dec, 12 sc [26]
R 18: dec, 11 sc, dec, 10 sc – last 1 sc together with 1 sc of the 1st arm!
R 19: 3 sc together with sc of the 1st arm, 6 sc,  4 sc together with sc of the 2nd arm, 10 sc
Stuff with fiberfill.
R 20: (2 sc, dec) repeat 6 times [18]
R 21: (1 sc, dec) repeat 6 times [12]
Finish stuffing.
Fasten off.

Hat
With Alize Softy yarn and 2.5 mm crochet hook.
Make 22 ch, join in ring with sl st.
R 1: 22 sc
Change to red yarn (1.5 mm crochet hook):
R 2: 22 sc
R 3-6: 22 sc (4 rows)
R 7: (dec, 9 sc) repeat 2 times [20]
R 8-9: 20 sc (2 rows)
R 10: (dec, 8 sc) repeat 2 times [18]
R 11-12: 18 sc (2 rows)
R 13: (dec, 7 sc) repeat 2 times [16]
R 14-15: 16 sc (2 rows)
R 16: (dec, 6 sc) repeat 2 times [14]
R 17-18: 14 sc (2 rows)
R 19: (dec, 5 sc) repeat 2 times [12]
R 20-21: 12 (2 rows)
R 22: (dec, 4 sc) repeat 2 times [10]
R 23-24: 10 sc (2 rows)
R 25: (dec, 3 sc) repeat 2 times [8]
R 26-27: 8 sc (2 rows)
R 28: (dec, 2 sc) repeat 2 times [6]
R 29-30: 6 sc (2 rows)
Fasten off.

Pompom
With white yarn and 1.5 mm crochet hook.
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: 12 sc
R 4: (dec) repeat 6 times [6]
Fasten off and leave a long tail for sewing.

Attach the pompom to the hat.

Assembly
Sew head to the body.
Sew beard to the head.
Embroider nose with beige yarn on 3 sc.
Sew eyes to the face above nose.
Sew the hat on the head.
Embroider a buckle with yellow floss.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.