Materials:

• yarn of selected colors (YarnArt Jeans 160 m / 50 gr);
• hook 2.25 mm and 1.4 mm (if you use a different yarn, you will have to choose the size of the hooks yourself);
• filler;
• stitching needle.

Abbreviations:
KA – amigurumi ring
sbn – single crochet
pr – increase
pr3 – 3 sbn in one loop
dec – decrease

By default, we use a 2.25 mm hook. Where a smaller hook is needed is indicated.Yarn colors are not indicated, as cockerels can be very different.Small details (wings, tail, paws, beak) I did not fill, but you can do as you like.

HEAD-BODY
Row 1:  6 sc in the amigurumi ring (6)
Row 2:  (inc) x6 (12)
Row 3:  (1 sc, inc) x6 (18)
Row 4:  (2 sc, inc) x6 (24)
Row 5:  (3 sc, inc) x6 (30)
Row 6:  (4 sc, inc) x6 (36)
Row 7:  (5 sc, inc) x6 (42)
Row 8:  (6 sc, inc) x6 ( 48)
Row 9:  (7 sc, inc) x6 (54)
Row 10:  (8 sc, inc) x6 (60)
Rows 11-19:  60 sc
Row 20:  (8 sc, dec) x6 (54)
Row 21 :  (7 sc, dec) x6 (48)
Row 22:  (6 sc, dec) x6 (42)
Row 23:  (5 sc, dec) x6 (36)
Row 24:  (4 sc, dec) x6 (30)
Row 25:  (3 sc, dec) x6 (24)
Stuff the detail
Row 26:  (2 sc, dec) x6 (18)
Row 27:  (1 sc, dec) x6 (12)
Row 28:  (dec) x6 ( 6)
Finish knitting, pull off the hole.

Tail
Medium feather
Row 1:  6 sc in the amigurumi ring (6)
Row 2:  (inc)x6 (12)
Row 3:  (3 sc, inc)x3 (15)
Rows 4-5:  15 sc
Row 6:  (3 sc , dec) x3 (12)
Row 7:  (1 sc, dec) x4 (8)

Extreme feather (2 pcs)
Row 1: 6 sc in the amigurumi ring (6)
Row 2:  (pr) x6 (12)
Rows 3-4:  12 sc
Row 5:  (2 sc, dec) x3 (9)
Row 6:  (1 sc, dec) x3 (6)
Do not break the thread on the second extreme feather. We connect the feathers in the tail:
Row 7:  Knit 3 sc in the first extreme feather, 4 sc in the middle feather, 6 sc in the second extreme feather, 4 sc in the remaining loops of the middle feather, 3 sc in the remaining loops of the first extreme feather (20) Row
8 :  4 sc, dec, 8 sc, dec, 4 sc (18)
Fold the piece in half and knit 9 sc.

Wings (2 pcs):
Feathers (3 pcs for one wing)
Row 1:  6 sc in the amigurumi ring (6)
Row 2:  (1 sc, inc) x3 (9)
Row 3:  (2 sc, inc) x3 (12 )
Row 4:  12 sbn
Row 5:  (dec) x6 (6)
On the third feather, do not break the thread and continue to knit:
Row 6: Knit 3 sbn on the first extreme feather, 3 sbn on the middle feather, 6 sbn on the second extreme feather, 3 sc in the remaining stitches of the middle feather, 3 sc in the remaining stitches of the first extreme feather (18)
Row 7:  18 sc
Row 8:  (1 sc, dec) x6 (12)
Row 9:  (dec) x6 (6)
Finish knitting, pull the hole.

Paws (2 pcs):
Middle finger:
Start knitting with a large crochet:
Row 1:  5 sc in the amigurumi ring (5)
Row 2:  (pr) x5 (10)
Row 3:  (dec) x5 (5)
Change the hook to a smaller one:
Rows 4-5:  5 sc

Side finger (2 pcs):
Start knitting with a large crochet:
Row 1:  5 sc in the amigurumi ring (5)
Row 2:  (pr) x5 (10)
Row 3:  (dec) x5 (5)
Change the hook to a smaller one:
Row 4 :  5 sc

On the second side finger, do not cut the thread and continue to knit with a smaller hook:
Row 1:  Knit 2 sc on the first side finger, 2 sc on the middle finger, 5 sc on the second side finger, 3 sc on the remaining loops of the middle finger, 3 sc on the remaining loops of the first side finger (15)
Row 2:  (1 sc, dec) x5 (10)
Row 3:  (dec) x5 (5)
Row 4:  5 sc
Change the hook to a larger one:
Row 5:  (pr) x5 (10)
Row 6:  (dec) x5 (5)
Finish knitting, pull off the hole.

Beak
With smaller hook:
Row 1:  5 sc in KA
Row 2:  2 sc, inc3, 2 sc (7)
Row 3:  3 sc, inc3, 3 sc (9)
Row 4:  4 sc, inc, 4 sc (10)

Comb
Large comb:
Row 1: 6 sc in the amigurumi ring (6)
Row 2:  (pr) x6 (12)
Row 3:  (1 sc, inc) x6 (18)
Row 4:  (2 sc, inc) x6 (24 )
Row 5:  (3 sc, inc) x6 (30)
Row 6:  (4 sc, inc) x6 (36)
Rows 7-11:  36 sc
Row 12:  8 sc, (dec, 4 sc) x4, 4 sc (32)
Row 13:  10 prs, (dec, 8 prs) x2, 2 prs (30)
Row 14:  (3 prs, dec) x6 (24)
Row 15:  5 prs, 14 prs for the back half loop, 5 prs ( 24)
Row 16:  24 sbn
Row 17:  5 sbn, 14 sbn for the front half loops remaining in the 15th row, 5 sbn (24)
Row 18: (2 sbn, ub)x6 (18)
Row 19:  18 sbn
Row 20:  (1 sbn, ub)x6 (12)
Row 21:  12 sbn

Middle comb:
Row 1:  6 sc in the amigurumi ring (6)
Row 2:  (inc) x6 (12)
Row 3:  (1 sc, inc) x6 (18)
Row 4:  (2 sc, inc) x6 (24)
Rows 5-6:  24 sc
Row 7:  (4 sc, dec) x4 (20)
Row 8:  (3 sc, dec) x4 (16)
Row 9:  16 sc
Row 10:  (2 sc, dec) x4 (12 )
Row 11:  12 sc
Row 12:  (1 sc, dec) x4 (8)
Row 13:  8 sc

Small comb:
Row 1:  6 sc in the amigurumi ring (6)
Row 2:  (inc)x6 (12)
Row 3:  (1 sc, inc)x6 (18)
Rows 4-5:  18 sc
Row 6:  (4 sc , dec) x3 (15)
Row 7:  (3 sc, dec) x3 (12)
Row 8:  12 sc
Row 9:  (2 sc, dec) x3 (9)
Row 10:  (1 sc, dec) x3 (6 )
On a small comb, do not break the thread and knit: 3 sc along the small comb, 4 sc along the middle comb, 12 sc along the large comb, 4 sc along the remaining loops of the middle comb, 3 sc along the remaining loops of the small comb (26) Stuff the part tightly.

Eyes
Row 1:  6 sbn in the amigurumi ring (6)
Row 2:  (pr)x6 (12)
Row 3:  12 sbn
Also, eyes can be molded from polymer clay.

Assembly

• Sew the tail to the 9th row of the body.
• Sew the wings with a corner at the level of the 12th row.
• Sew the comb in the middle of the head from above perpendicular to the tail.
• On the eyes, embroider a pupil or sew on a bead (insert a safe eye).
• Choose the position for the eyes and beak and sew. Fill the eyes a little before the end of sewing.
• Sew the legs on the bottom of the body.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Materials:
Yarn: yellow, orange, red, brown, white density is about 320m – 400m / 100g
1.5mm hook
Hollowfiber filler
Copper (aluminium) wire with a diameter of 0.9-1.0 mm, approximately 130 cm (for legs, you can take a wire with a diameter of 1.5)
Adhesive tape for insulation wire
Plastic eyes with a diameter of 10 mm,
Artificial eye lashes
See the step-by-step photos in russian version (download link):

Abbreviations and terms (US):
st – stitch
sc – single crochet
ch – chain
dc – double crochet
hdc – half double crochet
sl st – sliip stitch
inc = increase – 2 sc in 1 next st
dec = decrease – 2 st of the previous round crochet together
rnd – round/s
mr – magic ring
BLO – work in back loops only
FLO – work in front loops only

Head
orange yarn
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (1 sc, inc)б times = 18 4 rnd: (2 sc, inc)б times = 24
5 rnd: (3 sc, inc)б times = 30 б rnd: (4 sc, inc)б times = 36
7-12 rnd: 36 sc
13 rnd: б sc, 6 inc, 12 sc, 6 inc, 6 sc = 48
14 rnd: б sc, (1 sc, inc)б times, 12 sc, (inc, 1 sc)б times , б sc = 60
15-20 rnd: 60 sc
21 rnd: 60 sc + 1 sc to move the beginning
22 rnd: б sc, (1 sc, dec)6 times, 12 sc, (dec, 1 sc)6 times , б sc = 48
23 rnd: 6 sc, б dec, 12 sc, б dec, 6 sc = 36
24 rnd: (4 sc, dec) *6 times = 30
25 rnd: (3 sc, dec) *6 times = 24
26 rnd: (2 sc, dec) *6 times = 18
27 rnd: 18 sc
Finish, cut off the yarn. Stuff well.

Beak (top piece)
yellow yarn
1 rnd: 3 sc in mr
2 rnd: З inc = 6
3 rnd: (1 sc, inc) * 3 times = 9
4 rnd: 9 sc
5 rnd: (2 sc, inc) * З times = 12
б rnd: 12 sc
7 rnd: (3 sc, inc) * З times = 15
8 rnd: (4 sc, inc) * З times = 18
9 rnd: (2 sc, inc) *6 times = 24
10 rnd: (3 sc, inc) *6 times = 30
11 rnd: (4 sc, inc) *6 times = 36
12rnd: (5 sc, inc) *6 times = 42
13 rnd: (6 sc, inc) *6 times = 48
14-16 rnd: 48 sc,
Finish, cut off the yarn.

Beak (lower piece)
1 rnd: 6 sc in magic ring
2 rnd: 6 sc
З rnd: (1 sc, inc) * З times = 9
4 rnd: (2 sc, inc) * З times = 12
5 rnd: (3 sc, inc) * 3 times = 15
б rnd: (4 sc, inc) * 3 times = 18
7 rnd: (5 sc, inc) * 3 times = 21
8 rnd: (6 sc, inc) * 3 times = 24
9 rnd: (7 sc, inc) *3 times = 27
10 rnd: (8 sc, inc) * 3 times = 30
Don’t cut the yarn!
Put together 2 pieces and make 18 sc.
Replace your row marker here.
Crochet 2 rounds: sc around (42).
Cut the yarn, leave a long tail for sewing. Make a crease on the bridge of the nose, folding the top part in half.
Try on the beak to the head. Sew it. Don’t stuff the beak.

Legs
brown yarn

Big toe (2 p.):
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-4 rnd: 12 sc
5 rnd: (1 sc, dec) *4 times = 8
б rnd: (2 sc, dec) * 2 times = 6
7-12 rnd: 6 sc.
Cut off the yarn, stuff the toes.

Toe (2 p. for each leg):
1 rnd: 6 sc in magic ring
2 rnd: б inc = 12
3-4 rnd: 12 sc
5 rnd: (1 sc, dec) *4 times = 8
б rnd: (2 sc, dec) *2 times = 6
7-11 rnd: б sc
For the last toe: don’t cut the yarn, stuff the toe. Collect the toes in a foot:

Foot
1 rnd: 3 sc along the 1st toe, 3 sc along the big toe, 6 sc along the 2nd toe, 3 sc along the big toe, 3 sc along the 1st toe = 18 sc
2-3 rnd: 18 sc
4 rnd: (1 sc, dec) *6 times = 12
5 rnd: 2 sc, 3 ch, skip 3 sc, 7 sc = 12
б rnd: 2 sc, 3 sc in chains, 7 sc = 12 (it’s a hole for the Leg)
7 rnd: 6 dec = 6
8-9 rnd: б sc
10 rnd: (1 sc, inc) * 3 = 9
11 rnd: 9 sc
12 rnd: (1 sc , dec) * 3 =6
Cut off the yarn, close the hole using a needle.

Remarks from the translator:
Since I’m also an amigurumi designer (a little), I will allow myself to give an advice on the wireframe from the Foot to the Head:
If the size of your rooster does not match author doll size, then the recommended wire length may not be enough for your doll. Therefore, I advise you to postpone this step of the work until the stage when you complete the Body. In this case you can put together all the parts and determine what length of the wire you need, so that it is enough to the top of the head.
Cut 4 pieces of wire about 9 cm long and two pieces about 30 cm. If your wire is thin, you can twist it in 2ply. Insulate the tips, insert them into the toes, connect them together, isolate the connection. You can insert the wire into the spur too. Stuff the foot and the spur. The long wire is “the spine” that goes to the head.

Leg
Make 8 sc around the hole in the center of the Foot
1-7 rnd: 8 sc
8 rnd: (2 sc, dec) * 2 times = 6
9-14 rnd: 6 sc.
Change yarn to orange
15 rnd: б inc = 12
16 rnd: 12 sc
17 rnd: (1 sc, inc) * б times = 18
18-19 rnd: 18 sc
20 rnd: (2 sc, inc) * 6 times = 24
21 rnd: 24 sc
Finish, cut off the yarn, leaving a long tail for sewing

Wings
orange yarn

The 1st (shortest) feather (2 p.)
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-10 rnd: 8 sc

The 2nd feather (2 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-12 rnd: 8 sc

The 3rd feather (2 p.)
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-14 rnd: 8 sc

The 4th ( longest) feather (2 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-16 rnd: 8 sc
Don’t cut off the yarn, continue crocheting. Don’t stuff the feathers.
Join the feathers in the Wing. Don’t replace your row marker.
17 rnd: 4 sc along the 4th feather, 8 sc along the 3rd one, 4 along the 4th one = 16 sc
18 rnd: 16 sc
19 rnd: 8 sc, apply the 2nd feather, make 8 sc along the 2nd feather, 8 sc = 24
20 rnd: 24 sc
21 rnd: 12 sc, 8 sc along the 1st feather, 12 sc = 32
22 rnd: 32 sc
23 rnd: 8 sc, dec, 12 sc, dec, 8 sc = 30
24 rnd: 7 sc, dec, 12 sc, dec, 7 sc = 28
25 rnd: б sc, dec, 12 sc, dec, 6 sc = 26
26 rnd: 5 sc, dec, 12 sc, dec, 5 sc = 24
27 rnd: 4 sc, dec, 12 sc, dec, 4 sc = 22
28 rnd: 3 sc, dec, 12 sc, dec, 3 sc = 20
29 rnd: 2 sc, dec, 12 sc, dec, 2 sc = 18
30 rnd: 1 sc, dec, 12 sc, dec, 1 sc = 16
31 rnd: dec, 12, dec = 14
32 rnd: dec, 10, dec = 12
33-36 rnd: 12 sc
Cut of the yarn, leaving a long tail. Stuff the Wing a little (optional). Install a wire in the longest feather (the feather length + 5 cm)

Body
1 rnd: б sc
2 rnd: 6 inc = 12
З rnd: (1 sc, inc) *6= 18
4 rnd: (2 sc, inc) *6= 24
5 rnd: (3 sc, inc) *6= 30
б rnd: (4 sc, inc) * 6 = 36
7 rnd: (5 sc, inc) *6= 42
8 rnd: (6 sc, inc) *6= 48
9 rnd: (7 sc, inc) *6= 54
10 rnd: 1 ch, skip 1 st (the hole for the leg wireframe), 7 sc, inc, 8 sc, inc, 3 sc, 1 ch, skip 1 st, 4 sc, inc, (8 sc, inc) *3 = 60
11 rnd: (9 sc, inc) *6= 66 (make 1 sc in the chains of the previous round)
12 rnd: (10 sc, inc) *6= 72
13 rnd: (11 sc, inc) *б = 78
14-22 rnd: 78 sc
23 rnd: 3 sc, (2 sc, dec) * 6 times, 51 sc = 72
24 rnd: 3 sc, (1 sc, dec) *б times, 51 sc = 66 – it’s place for rooster tail
25-27 rnd: 66 sc.
Install the leg wireframes, twist them and isolate the connection.
28 rnd: (9 sc, dec) *6 times = 60
29 rnd: (8 sc, dec) *6 times = 54
30 rnd: (7 sc, dec) * 6 times = 48
31 rnd: (6 sc, dec) *б times = 42
32 rnd: (5 sc, dec) * 6 times = 36
33 rnd: (4 sc, dec) *6 times = 30.
Install the wing frames at the 27th round. Attach them to the spine wireframe.
34 rnd: (3 sc, dec) *6 times = 24
35 rnd: 24 sc
36 rnd: (2 sc, dec) *6 times = 18
37-39 rnd: 18 sc
40 rnd: (1 sc, dec) *6 times = 12
41-51 rnd: 12 sc
52 rnd: (1 sc, inc) *6 times = 18
Sew the Wings. Install the spine frame in the Head. Sew the Head.
Sew the Legs to the Body.

Tail feathers (3 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (2 sc, inc) * 4 times = 16
4-6 rnd: 16 sc
7 rnd: (2 sc, dec) 4 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times = 10
12-14 rnd: 10 sc
15 rnd: (dec, 3 sc) * 2 = 8
16-18 rnd: 8 sc
19 rnd: (dec, 2 sc) * 2 =6
20-22 rnd: 6 sc

Join all the feathers with orange yarn.
1 rnd: 3 sc along the 1st feather, 3 sc along the 2nd one, 6 sc along the 3rd one, 3 sc along the 2nd one,3 sc along the 1st one = 18 sc
2 rnd: 18 sc
3 rnd: (1 sc, dec) *6 times = 12
4 rnd: (1 sc, inc) *б times = 18
5 rnd: (2 sc, inc) * 6 times = 24
б rnd: 24 sc
Cut off the yarn, leave a long tail.

Сockscomb
Consist of 3 parts

Big part
1 rnd: б sc in magic ring
2 rnd: б inc = 12
З rnd: (1 sc, inc) *6 times = 18
4-6 rnd: 18 sc
7 rnd: (1 sc, dec) *6 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times = 10
12-15 rnd: 10 sc
16 rnd: (dec, 3 sc) * 2 times = 8
17-19 rnd: 8 sc

Middle part
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (1 sc, inc) *6 times = 18
4-6 rnd: 18 sc
7 rnd: (1 sc , dec) * 6 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times =10
12-15 rnd: 10 sc
16 rnd: (dec, 3 sc) *2 times = 8
17 rnd: 8 sc

Small part
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3 rnd: (2 sc, inc) * 4 times = 16
4-6 rnd: 16 sc
7 rnd: (2 sc, dec) *4 times = 12
8-9 rnd: 12 sc
10 rnd: (dec, 4 sc) * 2 times = 10
11-13 rnd: 10 sc
14 rnd: (dec, 3 sc) * 2 times = 8.
Join all 3 parts:
15 rnd: 4 sc along the small part, 4 sc along the middle part , 8 sc along the big part, 4 sc along the middle part, 4 sc along the small part = 24
16 rnd: 24 sc
Sew the cockcomb to the head

Beard
2 parts :
1 rnd: б sc in magic ring
2 rnd: б inc = 12
з rnd: (1 sc, inc) *6= 18
4-5 rnd: 18 sc
б rnd: (1 sc, dec) *6=12
7-9 rnd: 12 sc
10 rnd: б dec = 6
11-12 rnd: 6 sc
Join both parts with 3 sc, sew to bottom of the beak

Eyes
(Author thanks Maria Ustyushkina for this addition to the pattern)
Begin with white yarn
1 rnd. 6 sc in mr (6)
2 rnd. inc6 times (12) 3 rnd. (1sc, inc)6 times (18)
4 rnd. 18 sc (18)
5 rnd. (1sc, dec)6 times (12) 
Install the eyes between the 2 and 3 rounds. Fix them, stuff a little. 
6 rnd. dec6 times (6)
Sew the eyes to the head. Make purple.

Eyelids:
1 rnd: 11 ch
2 rnd: sc in the 2nd from the hook, 9 сон, turn
З rnd: dec, 6 sc, dec = 8, leave a long tail for sewing.
Glue the eyelashes, sew the eyelids.
You rooster is ready!