Head:
Amigurumi ring: 6
– Increase in a circle (12)
– (SC, increase) repeat in a circle (18)
– (SC 2, increase) repeat in a circle (24)
– (SC 3, increase) repeat in a circle (30) )
– (Sc 4, increase) repeat in a circle (36)
– RLS in a circle, repeat 5 times (36)
– RLS 8, increase, RLS, increase, RLS 14, increase, RLS, increase, RLS 8 (40)
– RLS in a circle (40)
– RLS 11, increase, RLS 6, increase, RLS 2, increase, RLS 6, increase, RLS 11 (44) –
RLS in a circle (44) –
RLS 11, decrease, RLS 18, decrease ., RLS 11 (42)
– RLS 5, decrease, RLS 5, decrease, RLS 4, decrease, RLS 2, decrease, RLS 4, decrease, RLS 5, decrease, RLS 5 (36)
– (SC 4, decrease) repeat in a circle (30)
– (sc 3, decrease) repeat in a circle (24)
– (sc 2, decrease) repeat in a circle (18)
– (sc, decrease) repeat in a circle (12)
– decrease in a circle (6)
– close the last loop

Please note:The loop closes at the level of the middle of the back of the head. This matters because you should end up with small cheeks and a small nose. Understanding where you are in knitting will allow you to properly stuff your toy.

Body:
– Amigurumi ring: 6
– Increase in a circle (12)
– (SC, increase) repeat in a circle (18)
– RLS 2, increase, RLS 2, increase, RLS, increase, RLS 2, increase, RLS, increase, RLS 2, increase, RLS 2 (24)
– RLS 2, increase, RLS 2, increase, RLS 2, increase, RLS, increase, RLS 2, increase, RLS, increase, RLS 2, increase, RLS 2, increase, RLS 2 (32)
– RLS in a circle, repeat 5 times (32)
– RLS 7, increase, RLS 6, increase, RLS 2, increase, RLS 6, increase, RLS 7 (36)
– RLS in a circle, repeat 2 times ( 36)
– RLS 4, decrease, RLS 4, decrease, RLS 3, decrease, RLS 2, decrease, RLS 3, decrease, RLS 4, decrease, RLS 4 (30) – RLS in a circle,
repeat 4 times (30)
– RLS 4, decrease, RLS 4, decrease, RLS 2, decrease, RLS 2, decrease, RLS 4, decrease, RLS 4 (25) – RLS
in a circle (25)
– Close the last loop

The loop closes at the level of the middle of the lower part of the body.

Paws:
– Amigurumi ring: 6
– Increase in a circle (12)
– RLS in a circle (12)
– RLS 3, increase, RLS 4, increase, RLS 3 (14)
– RLS in a circle (14)
– RLS 4, increase, RLS 4, increase, RLS 4 (16)
– RLS 4, increase, RLS 6, increase, RLS 4 (18)
– RLS in a circle (18)
– RLS 5, increase, RLS 6, increase, RLS 5 (20)
– close the last loop

The loop closes at the level of the midline from below the front paw.

Hind legs:
– Amigurumi ring: 6
– Increase in a circle (12)
– (SC, increase) repeat in a circle (18)
– (SC 5, increase) repeat in a circle (21)
– RLS 5, decrease, RLS 2, decrease., RLS 3, decrease, RLS 5 (18)
– (RLS 4, decrease) repeat in a circle (15)
– RLS 13, decrease. (14)
– RLS 3, increase, RLS 2, increase, RLS 2, increase, RLS 4 (17)
– increase, RLS 4, increase, RLS 3, increase, RLS 2, increase, RLS 4 (21) –
(RS 6, increase) repeat in a circle (24)
– RLS 8
– Close the last loop

Its hind legs should be shaped like feet, keep this in mind when you collect and stuff the toy!

Ears:
– Amigurumi ring: 4
– (sc, increase) repeat in a circle (6)
– (sc, increase) repeat in a circle (9)
– (sc 2, increase) repeat in a circle (12)
– (sc 3, increase ) repeat in a circle (15)
– RLS 4, increase x 2 times, RLS 6, increase, RLS 2 (18)
– RLS in a circle (18)
– Close the last loop

[adrotate group=»5″]

Bud: (knit in 2 stages)
Stage 1:
– Amigurumi ring: 6
– Increase in a circle (12)
– (sc, increase) repeat in a circle (18)
– (sc 2, increase) repeat in a circle (24)
– sc in a circle (24)
– (sc 3, increase) repeat in a circle (30)
– (sc 4, increase) repeat in a circle (36)
– sc in a circle, repeat 3 times (36)
– (sc 5, increase) repeat in a circle (42)
– (sc 6, increase) repeat in a circle (48)
– (sc 7, increase) repeat in a circle (54)
– sc in a circle, repeat 2 times (54)
– (sc 7, decrease) repeat in a circle (48)
– (sc 6, decrease) repeat in a circle (42)
– (sc 5, decrease) repeat in a circle (36)
– (sc 4, decrease) repeat in a circle (30)
– (sc 3, decrease) repeat in a circle (24)
– (sc 6, decrease) repeat in a circle (21)
– (sc 5, decrease) repeat in a circle ( 18)
– (sc 4, dec) repeat in circle (15)
– (sc 3, decrease) repeat in circle (12) – This circular row will be used in the second step –
Dec in a circle for the inner walls of the loops (6)
– Cast off loop (sew up the hole, but do not touch the outer walls of the loops, which will be used in the second step).

Step 2: At this step, we knit the leaves on top of the bud. Turn the bud over, knit for the outer walls of the loops of the penultimate row of the first stage.
– RLS in a circle (12)
– (connection st., increase in PSN) in a circle (18) You will receive leaflets on top of the bud.
– close the last loop

Please note:After attaching the bud to the body, the author spread the yarn on the table and divided it into 6 parts, chose 2 threads woven together to give more strength.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Materiаls and toоls
Үаrn Alizе Cotton Gold
Нoоk 2.5 mm
Threаd for deсоrating the muzzle
Εyes fоr tοys 7 mm
Fіllеr for tοуs
Pіnk felt
Nеedlе fοr sewіng details
Sсissors

Conventions
sс – singlе сrοсhеt
рr – іncreаse
ub — bеаυtу
(…) хn – rерeat n times

Нeаd

1. 6 sc іn 2 sts frоm hoοk
2. 6 іnс (12)
3. (1 sс, inc) x 6 (18)
4. (2 sc, inc) x 6 (24)
5. (3 sc, іnc) x 6 (30)
   6-8. υnchаngеd (30)
6. (3 sс, dec) х 3, 15 sс (27)
7. 3 sc, іnc, 7 sс, inс, 15 sс (29)
8. 4 sс, іnc, 8 sc, inс, 15 sc (31)
9. υnchanged (31)
10. 4 sc, deс, 8 sc, dес, 15 sс (29)
11. (4 sс, deс) x 4, 3 sс, dec (24)
12. ( 3 sc, dес) х 4, 2 sс, dеc (19)
13. (2 sс, deс) х 4, sс, deс (14)
14. (1 sс, deс) x 4, 2 deс

Ears (2 pаrts)
We stаrt with blасk уarn:

1. 4 sс in 2 sts frоm hοok (4)
2. (sc, іnс) x 2 (6)
3. unchangеd (6)
   Νeхt, knit with yellow yarn
4. 6 sc
5. (2 sc, inc) x 2 ( 8)
   6-8. unсhаngеd (8)

We do nοt fіll іf we knіt wіth sеmi-сotton.

Hаndles (2 раrts)

1. 6 sс in 2 sts from hoοk
2. (sс, inс) х 3 (9)
   3-5. no сhangе (9)
3. (2 sс, inс) x 3 (12)
   7-8. υnсhanged (12)

Dо nоt fіll if we knit wіth semi-сottоn, fоld in half аnd knit 6 sc. Fastеn and cut thе threаd, we wіll knіt thе hаndles into the body.

Legs (2 pаrts)

1. 6 sc іn 2 sts from hook
2. (sc, іnс) x 3 (9)
   3-5. Νо changе (9)

Wе do not fill іf wе knit with semі-сotton.

Βοdу

1. 6 sc in 2 sts from hоok
2. 6 іnc (12)
3. (1 sc, іnc) x 6 (18)
4. (2 sс, іnc) x 6 (24)
5. (3 sс, inc) x 6 (30)
6. (4 sc, іnc) х 6 (36)
   7-9. υnсhangеd (36)
7. 6 sс, dec, 5 sc, dес, 8 sc, dес, 5 sс, dеc, 4 sc (32)
8. 5 sс, dеc, 4 sc, dес, 7 sс, dec, 4 sс, deс, 4 sc (28)
9. 24 sс – уellοw, 4 sс – orange (28)
10. 5 sc – οrangе, 23 sc – yеllοw (28)
11. Nο сhаnge – уеllow (28)
12. 25 sс – yеllοw, 3 sc – orange (28)
13. 5 sc – оrangе, 23 sc – уellow (28)
14. 7 sс, 6 sс wіth fοot, 7 sc, 6 sс with fоοt, 2 sс (28)
15. (4 sc, deс) x 5, 2 sс, dес (23)
16. dес х 11, sс (12 )

Tаil

Wе knit twо halνеs of the tаil аnd tie sbn with уarn οf thе сorrеsрondіng cоlоr. At the рrοtrudіng сornеrs, we make increаsеs. Tightlу fіll in х аn ode of knіttіng. Sew undеr thе stripеs on thе back at an аnglе.

Аssemblіng thе tοy
Fіll fоrming chеeks.
We sеw еуеs bеtween 9 аnd 10 rows, аt а distanсe οf 4 sс.
We insert thе spout betweеn 10 and 11 rows.
Wе еmbrоidеr а mouth.
Wе gluе thе fеlt сheeks thаt fit thе size οf уоur toy.
Sеw on the eаrs.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

• 0.75 and 1.00 mm hooks
• Orange, flesh-colored and white yarn. Also mouline DMC 798 (navy blue), DMC
  B5200 (white) yarn
• Pieces of orange, yellow and red carded merino wool
• Sewing needle
• Stuffing material

Charmander – character from popular franchise “Pokemon” that is managed by The
Pokémon Company, a Japanese consortium between Nintendo, Game Freak, and
Creatures.
This toy was crocheted with “Garden 10” yarn. This is 100% cotton, 280m/50g. To
create a toy with a height of 8.5 cm you must crochet with single yarn using a 1.00
mm hook. To crochet the eyes you should use a 0.75 mm hook. You can use the same
mouline yarn as was mentioned in materials or any matching color yarn, but you have
to make it two times thinner than the main yarn to crochet the eyes. The flame on the
tail end is made of carded merino wool combed sliver with a 18 mic thickness. The
stuffing material used in this toy is polyester wadding.

Abbreviations

Ch chain
Sl slip stitch
Sc single crochet
Dc double crochet
INC increase
INVDEC invisible decrease
HDc half double crochet
INCHDc 2HDc crocheted in one stitch
(INCHDc: 2HDc crocheted in one stitch,
1HDc, one of which is crocheted with
*1HDc) main color and the second
one with additional color

Tip 1
The toy must be crocheted with tight stitches, to be sure that there won’t be any holes through which stuffing material can be seen.

Tip 2

To keep track can be seen. of the beginning of the row, use a marker. Pin marker to the last loop of the row. Every new row must be finished with a loop at the marker.

All amigurumi toys are crocheted with tight stitches. Avoid small holes when stretching crochet fabric, if there are some tiny holes, use a smaller size hook. To avoid seams, all details are crocheted in a spiral without slip stitch and lifting loops. There is a chance that you will lose the beginning of the row; to avoid this, use a marker. It can be a colored pin or thread of contrasting color.

Head
With orange yarn, 1.00 mm hook

1 row 6Sc in magic circle (6)
2 row 6INC (12)
3 row (1Sc, INC) repeat 6 times (18)
4 row (2Sc, INC) repeat 6 times (24)
5 row (3Sc, INC) repeat 6 times (30)
6 row (4Sc, INC) repeat 6 times (36)
7 — 8 rows Sc in each Sc around (36)
9 row (11Sc, INC) repeat 3 times (39)
10 — 11 rows Sc in each Sc around (39)
12 row 11Sc, INC, 4Sc, INVDEC, 4Sc, INVDEC,4Sc, INC, 10Sc (39)
13 row 12Sc, INC, 2Sc, INC, 1Sc, INC, 4Sc, INC, 1Sc, INC, 2Sc, INC, 11Sc (45)
14 row 22Sc, 2INC (nose), 21Sc (47)
15 row 22Sc, 2INVDEC (nose), 21Sc, 1Sc (extra stitch made to help conceal the unshapely edges) (45)

Tip 3
To avoid uneven edges, all details that are made in spiral technique must be finished with a slip stitch.

Head
16 row 5Sc, INVDEC, 6Sc, INVDEC, 5Sc, INVDEC, 6Sc, INVDEC, 5Sc, INVDEC, 6Sc, INVDEC (39)
17 row 4Sc, INVDEC, 5Sc, INVDEC, 4Sc, INVDEC, 5Sc, INVDEC, 4Sc, INVDEC, 5Sc, INVDEC (33)
18 row 3Sc, INVDEC, 4Sc, INVDEC, 3Sc, INVDEC, 4Sc, INVDEC, 3Sc, INVDEC, 4Sc, INVDEC (27)
Stuff detail with stuffing material, continue crocheting.
19 row 2Sc, INVDEC, 3Sc, INVDEC, 2Sc, INVDEC, 3Sc, INVDEC, 2Sc, INVDEC, 3Sc, INVDEC (21)
20 row 1Sc, INVDEC, 2Sc, INVDEC, 1Sc, INVDEC, 2Sc, INVDEC, 1Sc, INVDEC, 2Sc, INVDEC (15)
21 row INVDEC, 1Sc, 2INVDEC, 1Sc, 2INVDEC, 1Sc, INVDEC (9)
22 row (1Sc , INVDEC) repeat 3 times (6), Sl Tighten all stitches. Cut the yarn, hiding the end inside the head.

Tip 4
When you stuff the detail, make sure that the nose is stuffed tight so that it can hold its shape.

Body
With orange yarn, 1.00 mm hook
1 row 6Sc in magic circle (6)
2 row 6INC (12)
3 row (1Sc, INC) repeat 6 times (18)
4 row (2Sc, INC) repeat 6 times (24)
5 row (3Sc, INC) repeat 6 times (30)
6 row (4Sc, INC) repeat 6 times (36)
7 — 10 rows Sc in each Sc around (36)
11 row (10Sc, INVDEC) repeat 3 times (33)
12 — 13 rows Sc in each Sc around (33)
14 row (4Sc, INVDEC, 5Sc) repeat 3 times (30)
15 — 16 rows Sc in each Sc around (30)
17 row (8Sc, INVDEC) repeat 3 times (27)
18 row Sc in each Sc around (27)
19 row (7Sc, INVDEC) repeat 3 times (24), Sl

Cut the yarn, leave a long end for sewing.
Stuff detail with stuffing material.

Forelegs
With orange yarn, 1.00 mm hook
1 row 6Sc in magic circle (6)
2 row 6INC (12)
3 row INC, 3Sc, 4INC, 4Sc (17)
4 row 17Sc, 1Sc (extra stitch made to help conceal the unshapely edges) (17)
5 row 5Sc, 4INVDEC, 4Sc (13)
6 — 9 rows Sc in each Sc around (13)
10 row INVDEC, 11Sc (12)
Stuff detail with stuffing material, continue crocheting.
11 row Sc in each Sc around (12)
12 row 6INVDEC (6), Sl
Cut the yarn, leave a long end for sewing.
Make 2 details.

Forelegs
The claws should be situated in the place where you crocheted 4INC (3rd row) and 4INVDEC (5th row).
Connect orange yarn to the center of INC and INVDEC and embroider the claw through the 4th row with a few stitches. The first claw is ready. Embroider two more claws on both sides of the first claw.
Fasten and cut the yarn, hiding the end inside the detail.
Repeat with the second foreleg.

Hind legs
With orange yarn, 1.00 mm hook
1 row 7Sc in magic circle (7)
2 row 7INC (14)
3 row 5Sc, 4INC, 5Sc (18)
4 row 18Sc, 1Sc (extra stitch made to help conceal the unshapely edges) (18)
5 row 5Sc, 4INVDEC, 5Sc (14)
6 row Sc in each Sc around (14)
7 row 6Sc, 2INC, 6Sc (16)
8 row 7Sc, 2INC, 7Sc (18)
9 row 8Sc, 2INC, 8Sc (20)
10 row Sc in each Sc around (20)
11 row 8Sc, 2INVDEC, 8Sc (18)
Stuff detail with stuffing material, continue crocheting.
12 row (1Sc, INVDEC) repeat 6 times (12)
13 row 6INVDEC (6), Sl

Cut the yarn, leave a long end for sewing.
Make 2 details.
Squish the top of the hind legs as shown on the photo.

Hind legs
The claws should be situated in the place where you crocheted 4INC (3rd row) and 4INVDEC (5th row).
Connect white yarn to the center of INC and INVDEC and embroider the claw through the 4th row with a few stitches. The first claw is ready. Embroider two more claws on both sides of the first claw.

Fasten and cut the yarn, hiding the end inside the detail.

Repeat with the second hind leg.

Tail
1 row 3Sc in magic circle (3)
2 row INC, 2Sc (4)
3 row INC, 3Sc (5)
4 row INC, 2Sc, 1HDc, 1Sc (6)
Connect flesh-colored yarn in the next row where you crochet second
HDc from first INC. Next Sc’s in fleshcolored yarn will be marked with a “*” sign.
5 row 1HDc, 3Sc, (INCHDc: 1HDc, *1HDc), INCHDc (8)
6 row 1HDc, 3Sc, 1HDc, *2HDc, 1HDc (8)
7 row 1HDc, 4Sc, 1HDc, *INCHDc, (INCHDc: *1HDc, 1HDc) (10)
8 row 1HDc, 4Sc, 1HDc, *4HDc (10)
9 row 2HDc, 4Sc, 1HDc, *1HDc, *2INCHDc (12)
10 row 2HDc, 5Sc, *5HDc (12)
11 row 2HDc, 5Sc, 1HDc, *2HDc, *2INCHDc (14)

Tip 5
Take a look at “Abbreviations” on the third page, to understand the tail’s pattern correctly.

Tail
12 row 2HDc, 6Sc, 1HDc, *5HDc (14)
13 row 2HDc, 6Sc, 1HDc, *3HDc, *2INCHDc (16)
14 row 2HDc, 7Sc, 1HDc, *6HDc (16)
15 row 2HDc, 7Sc, 2HDc, *3HDc, *2INCHDc (18)
16 row 3HDc, 9Sc, *6HDc (18)
17 row 11HDc (11), Sl (unfinished row).

Cut the yarn, leave a long end of both colors for sewing.
Stuff the tail with stuffing material, bend it a little as shown on the photo.

Stomach
With flesh-colored yarn, 1.00 mm hook
Ch6
1 row Sc in second stitch, 4Sc, Ch turn(5)
2 row INC, 3Sc, INC, Ch turn (7)
3 row 7Sc, Ch turn (7)
4 row INC, 6Sc, Ch turn (8)
5 row 8Sc, Ch turn (8)
6 row 7Sc, INC, Ch turn (9)
7 row 9Sc, Ch turn (9)
8 row INC, 8Sc, Ch turn (10)
9 row INC, 9Sc, Ch turn (11)
10 — 12 rows 11Sc, Ch turn (11)
13 row 9Sc, INVDEC, Ch turn (10)
14 row 10Sc, Ch turn (10)
15 row INVDEC, 8Sc, Ch turn (9)
16 row 9Sc, Ch turn (9)
17 row 7Sc, INVDEC, Ch turn (8)
18 row 8Sc, Ch turn (8)
19 row INVDEC, 6Sc, Ch turn (7)
20 — 22 rows 7Sc, Ch turn (7)
23 row 7Sc, crochet the whole circumference of the detail: 1Sc (in the same stitch, e.g. in 7th Sc), 22Sc
(into transverse loops) , INC (corner), 3Sc, INC (corner), 24Sc (into transverse loops) (61), Sl

Cut the yarn, leave a long end for sewing.

Eyes
With navy blue yarn (three threads of DMC 798), 0.75 mm hook
First part
Ch8
1 row Dc in third stitch, 5Dc (6)
Cut the yarn, leave a long end for sewing.
Make 2 details.

With white yarn (three threads of DMC B5200), 0.75 mm hook
Second part
Ch6
Cut the yarn, leave a long end for sewing.
Make 2 details.

Pupils
With black yarn (two threads of DMC 310), 0.75 mm hook
Ch3
1 row Sc in second stitch, 3Sc in the next stitch (crochet round), 2Sc in the next stitch (that already has the very first single crochet) (6)
Cut the yarn, leave a long end for sewing.
Make 2 details.

Assembly
Put the body under the bottom center of the head, adjusting it by the nose.
Sew the body with the end of orange yarn that we left before.
Fasten and cut the yarn, hiding the end inside the body.

Assembly
Place the stomach on the front part of the body so that its bottom part reaches the tail connection place and fasten it with pins. Sew the stomach with the end of flesh-colored yarn that we left before. If you can see orange color through the stomach, hide it by guiding flesh-colored yarn through these holes. Fasten and cut the yarn, hiding the end inside the body.

Assembly
Place the hind legs symmetrically to the bottom part of the body so that the squished parts lean against the body, and fasten them with pins.
Sew the hind legs with the end of orange yarn that we left before.
Fasten and cut the yarn, hiding the ends inside the body.
You don’t need to make it balanced as Charmander will be standing leaning on his tail.

Assembly
Place the forelegs on each sides of the body, a little bit lower than the connection of body and head. Raise one of the hands and fasten them with pins.
Sew the forelegs with the ends of orange yarn that we left before.
Fasten and cut the yarn, hiding the end inside the body.

Assembly
Place the tail at the back of the body so that its color is perfectly matched with the bottom part of the stomach and fasten it with pins.
Sew the tail with the ends of fleshcolored and orange yarn, keeping the color
Fasten and cut the yarn, hiding the ends inside the body.

Assembly
Put both parts of the eye against each other as shown on the photo. Fasten and cut the unnecessary ends of yarn from the beginning of crocheting on the back sides of the details. Split the second end of white yarn into strands and leave only one strand, because we will need very thin yarn for sewing. Sew both parts of the eye along the back side so that the seem is invisible. Do not cut the yarn, you will need the end of each color to sew the eye to the head. Repeat with the second eye. Place the eyes symmetrically a bit higher than the nose and fasten them with pins. Sew the eyes to the head along the whole circumference keeping the color of yarn.

Assembly
Place and sew the pupils on the center of the navy blue part of the eyes. Connect thin black
yarn and embroider the eyebrows, nostrils and mouth.
Embroider sparkles on the edge of both eyes and two tiny teeth making a few stitches with white yarn.
All yarns must be fastened, cut and hidden inside the head.

Assembly
Take carded wool in all three colors. Take every color of wool and split them into thin strands. Put together several strands of different colors.
Insert the hook into the end of the tail. Take a strand that we prepared before. Pull the strand into the stitch so that the length of the strand is equal on both sides.
Prepare the second strand of wool of different colors. Insert the hook perpendicular to the first strand.

Assembly

Pull the strand in the same way as you did the first time.
Cut the loops.
Comb the wool, in this way you will comb out unnecessary wool.
Pull the wool together, cut it if necessary and make it look like a fire flame.

Assembly
Congratulations, your Charmander is ready!

Both amigurumi pokemons use the same basic pattern. Please note that the red color is for Plusle and light blue color for Minun.

Abbreviations:
sc: single crochet   
ch: chain
St: Stitch
inc : increase
dec: decrease
sl st : slip stitch
F/O: Fasten off

Materials:
3 mm crochet hook
Milk cotton yarn in light yellow, red or light blue colors
Needle for sewing
Stuff
Scissors
16×11 mm oval safety eyes 
Black thread to sew mouth and nose

Note:
– Work in continuous round
– This pattern is used US terminology
– Size: 20 cm tall (from legs to head, not include the ears)

Skill Level: Beginner

Head:
Use light yellow
R1: ch 2, starting from second chain from hook 6 sc (6)
R2: inc, rep 6x (12)
R3: sc, inc, rep 6x (18)
R4: sc, inc, [2 sc, inc = rep 5x], sc (24)
R5: 3 sc, inc, rep 6x (30)
R6: 2 sc, inc, [4 sc, inc = rep 5x], 2 sc (36)
R7: 5 sc, inc, rep 6x (42)
R8: 3 sc, inc, [6 sc, inc = rep 5x], 3 sc (48)
R9: 7 sc, inc, rep 6x (54)
R10: 4 sc, inc, [8 sc, inc = rep 5x], 4 sc (60)
R11: 9 sc, inc, rep 6x (66)
R12-18: sc around
Attach safety eyes between R13 and 14 and give 12 stitches between them
R19: 9 sc, dec, rep 6x (60)
R20: 4 sc, dec, [8 sc, dec = rep 5x], 4 sc (54)
R21: 7 sc, dec, rep 6x (48)
R22: 3 sc, dec, [6sc, dec = rep 5x], 3 sc (42)
R23: 5 sc, dec, rep 6x (36)
R24: 2 sc, dec, [ 4 sc, dec = rep 5x], 2 sc (30)
R25: 3 sc, dec, rep 6x (24)
Stuff
F/O

Arms (make 2):
Use light blue or red
R1: ch 2, starting from second chain from hook 6 sc (6)
R2: sc, inc, rep 3x (9)
R3: sc around
R4: 2 sc, inc, rep 3x (12)
Cc to light yellow
R5-9: sc around
R10: 2 sc, dec, rep 3x (9)
stuff
F /O leaving a long tail for sewing the gap

Legs and Body:
Use light blue or red
1st leg:
R1: ch 2, starting from second chain from hook 6 sc (6)
R2: sc, inc, rep 3x (9)
R3: 2 sc, inc, rep 3x (12)
R4:  sc around
R5: 3 sc, inc, rep 3x (15)
R6-7: sc around
F/O
2nd Leg:
Repeat all 1st Leg step + ch 3 (this chain will be counted as stitches, front and back side)
Don’t cut the yarn because we will continue to crochet both legs together in next round)
Body:
R8: sc in all stitches of 1st leg (15), sc in each chain stitches (3), sc in all stitches of 2nd leg (15), sc in each chain stitches (3) (36 in total)
R9: 8 sc, inc, ulangi 4x (40)
R10: 8 sc, inc, 18 sc, inc, 12 sc (42)
R11-15: sc aroundStuff the legs
R16: 19 sc, dec, rep 2x (40)
R17: sc around
R18: 10 sc, dec, 19 sc, dec, 7 sc (38)
R19: sc around
R20: 17 sc, dec, rep 2x (36)
R21: sc around
In next round we will crochet both arms together
R22: 10 sc, sc in all stitches of 1st arm, 18 sc, sc in all stitches of 2nd arm, 8 sc (54)
R23: 7 sc, dec, rep 6x(48)
R24: 4 sc, dec, rep 8x (40)
R25: 2 sc, dec, rep 10x (30)
R26: sc, dec, [3 sc, dec = rep 5x], 2 sc (24)
Stuff
R27: sc around
R28: 4 sc, dec, rep 4x (20)
Stuff
F/O leaving a long tail for sewing

Ears (make 2):
Use light blue or red
R1: ch 2, starting from second chain from hook 6 sc (6)
R2: inc, rep 6x (12)
R3: sc around
R4: 3 sc, inc, rep 3x (15)
R5-6: sc around
R7: 4 sc, inc, rep 3x (18)
R8-16: sc around
R17: 4 sc, dec, rep 3x (15)
R18-19: sc around
R20: 3 sc, dec, rep 3x (12)
R21-22: sc around
F/O leaving a long tail for sewing

Bottom part of ears (make 4):
Use light yellow
R1: ch 2, starting from second chain from hook 5 sc (5)
R2: inc, rep 5x (10)
F/O leaving a long tail for sewing
Blushes (make 2):
Using light blue or red
R1: ch 2, starting from second chain from hook 6 sc
R2: inc, rep 6x (12)
R3: sc, inc, rep 6x (18)
F/O leaving a long tail for sewing
Sign:
Make 2 for minun and 4 for plusle
Use light blue or red
Ch 6, starting for second chain from hook, sl st in each sts
F/O leaving a long tail for sewing
Tail:
Part 1 (make 2):
Use light yellow
R1: ch 2, starting from second chain from hook 6 sc (6)
R2: sc, inc, rep 3x (9)
R3: sc around
F/O leaving a long tail for sewing
Part 2 (for minun):
Use light blue
R1: ch 14, starting from second chain from hook, sc in each sts (13)
R2-4: ch 1, turn, sc in each sts (13)
F/O
Part 2 (for plusle):
Use red
R1: ch 13, starting from second chain from hook, sc in each sts (12)
R2-3: ch 1, turn, sc in each sts (12)
Cut the yarn. And using same yarn color, join to 5th st of R3
R4: sc in next 4 sts (4)
R5-6: ch 1, turn, sc in each sts (4)
F/O
Finishing:
Sew the body to head.
Sew the ears on the head. Then, sew the bottom parts of ear to the front and back side of ears.
Embroider the nose and mouth by using black thread.
Sew the blushes on the head and the sign on the blushes. Make minus (-) sign for Minun and plus (+) for Plusle.
Sew the the part 1 of tail to the back and front side of center side of part 2.
Sew the tail to the back of body.
Finish.