If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Materials

• Troitsk Yarn (250 mt-273 yds; 100 g – 3.5 Oz) 100% acrylic. Brown color – 100 g.
• Troitsk Yarn (250 mt-273 yds; 100 g – 3.5 Oz) 100% acrylic. Dark brown color-50 g.
• Troitsk Yarn (250 mt-273 yds; 100 g – 3.5 Oz) 100% acrylic. Gray color – 20 g.
• New Kid’s (200 mt-218 yds; 50 g – 1.76 Oz) 100% acrylic. Beige color – 150 g.
• New Kid’s (200 mt-218 yds; 50 g – 1.76 Oz) 100% acrylic. Milk color- 50 g.
• Cotton thread – black, brown for decoration and glasses.
• Cotton or fleece / textile fabric 30×50 cm.
• Hollofayber, hullfiber filler or sintepon.
• 5 cotter pin.
• Hook clasp.
• Eye screws 2 pcs.
• 2 buttons.
• Transparent film (file for papers).
• Black acrylic paint and brush.
• Sizes 3 mm (US 2\C: UK 3\0) crochet hooks or size needed to obtain gauge & 1.25 mm (US 6: UK3)
• Scissors. Needle.

CROCHET I SKILL LEVEL: EASY

Abbreviations

MR – magic ring

ch — chain(s)

sl st — slip stitch

sc — single crochet\ double crochet

dec – decrease (2 sc together) \ decrease (2 dc together)

inc — increase (2 sc in one ch) \ increase (2 dc in one ch)

dc — double crochet \ treble crochet

hdc – half double crochet \ half treble crochet

x- repeat N times

rnd- round(s)

Attention! Instructions written in the US abbreviations!

Step 1. Knit hands for a bunny (arms)

Work with beige color yarn, hook №3

1 rnd: MR (6)

2 rnd: inc х 6 (12)

3 rnd: (sc, inc) х 6 (18)

4 rnd: (2 sc, inc) х 6 (24)

5-8 rnd (4 rnds): 24 sc (24)

9 rnd: dec х 4, 16 sc (20)

10-13 rnd (4 rnds): 20 sc (20)

14 rnd: dec х 2, 16 sc (18)

15-36 rnd (22 rnds): 18 sc (18)

Move 2 rounds back downwards and insert the pin with a disk so that decreases of round

9 look frontwards. I used 22 mm joint disk for arms (in order for the arms to fit closely to

the body, the diameter of the joint should be equal to the width of the arm at the

attachment point). You may have other parameters for the joint diameter!

Please note: I created a DIY tutorial on making cotter pin joints for toys, which is

attached additionally.

Stuff the arm, do not stuff the upper part of the arm too tightly, it should stay flat.

37 rnd: (sc, dec) х 6 (12)

38 rnd: dec х 6 (6)

Fasten off, cut and weave in ends.

Crochet the second arm in the same way.

Make sure you have the right and left arms

placing joints.

INSTRUCTIONS

Step 2. Knit legs for a bunny (legs)

Scheme leg

Work with beige yarn, hook №3

1 rnd: chain 10, starting from the 2nd loop from the hook: 3 sc into one stitch, 7sc along

the chain, 3 sc into the first ch, along the other side of the chain: 7 sc (20)

2 rnd: inc х 3, 7 sc, inc х 3, 7 sc (26)

3 rnd: (inc, sc) х 3, 7 sc, (inc, sc) х 3, 7 sc (32)

4 rnd: (inc, 2 sc) х 3, 7 sc, (inc, 2 sc) х 3, 7 sc (38)

5 rnd: (inc, 3 sc) х 3, 7 sc, (inc, 3 sc) х 3, 7 sc (44)

6 rnd: (inc, 4 sc) х 3, 7 sc, (inc, 4 sc) х 3, 7 sc (50)

7 rnd: (inc, 5 sc) х 3, 7 sc, (inc, 5 sc) х 3, 7 sc (56)

8 rnd: (inc, 6 sc) х 3, 7 sc, (inc, 6 sc) х 3, 7 sc (62)

9-16 rnd (8 rnds): 62 sc (62)

17 rnd: (sc, dec) х 9, (5 sc, dec) х 5 (48)

18 rnd: (sc, dec) х 6, (4 sc, dec) х 5 (37)

19 rnd: 37 sc (37)

20 rnd: (sc, dec) х 5, (3 sc, dec) х 4, 2 sc (28)

21 rnd: 28 sc (28)

22 rnd: (5 sc, dec) х 4 (24)

23- 36 rnd (14 rnds): 24 sc (24)

37 rnd: (3 sc, inc) х 6 (30)

38-49 rnd (12 rnds): 30 sc (30)

50 rnd: (3 sc, dec) х 6 (24)

51 rnd: (2 sc. dec) х 6 (18)

Move 3 rounds back downwards and insert a joint with a 32 mm disc. Stuff the leg and

continue crocheting.

52 rnd: (sc, dec) х 6 (12)

53 rnd: dec х 6 (6)

Fasten off, cut and weave in ends.

Crochet the second leg in the same way. Make sure you have the right and left legs

placing joints.

Step 3. Knit body for a bunny (body)

Work with beige color yarn, hook №3

The marker indicating the beginning of each round should be at the back.

1 rnd: MR (6)

2 rnd: inc х 6 (12)

3 rnd: (sc, inc) х 6 (18)

4 rnd: (2 sc, inc) х 6 (24)

5 rnd: (3 sc, inc) х 6 (30)

6 rnd: (4 sc, inc) х 6 (36)

7 rnd: (5 sc, inc) х 6 (42)

8 rnd: 42 rnds (42)

9 rnd: (6 sc, inc) х 6 (48)

10 rnd: (7 sc, inc) х 6 (54)

11 rnd: 54 sc (54)

12 rnd: (8 sc, inc) х 6 (60)

13 rnd: 60 sc (60)

14 rnd: (9 sc, inc) х 6 (66)

15 rnd: 24 sc, (sc, inc) х 9, 24 sc (75)

16-19 rnd (4 rnds): 75 sc (75)

20 rnd: (23 sc, dec) х 3 (72)

21-24 rnd (4 rnds): 72 sc (72)

25 rnd: (22 sc, dec) х 3 (69)

26-28 rnd (3 rnds): 69 sc (69)

29 rnd: (21 sc, dec) х 3 (66)

30-32 rnd (3 rnds): 66 sc (66)

Fold the body in half, the marker is placed at the middle of the body, place the legs joints

between rounds 7 and 8.

33 rnd: (9 sc, dec) х 6 (60)

34 rnd: (8 sc, dec) х 6 (54)

35 rnd: 54 sc (54)

36 rnd: (7 sc, dec) х 6 (48)

37 rnd: 48 sc (48)

38 rnd: (6 sc, dec) х 6 (42)

39-41 rnd (3 rnds): 42 sc (42)

42 rnd: (5 sc, dec) х 6 (36)

43-46 rnd (4 rnds): 36 sc (36)

Fold the body in half, the marker is placed at the middle of the body, move 4 rounds

back downwards and place the arms joints.

Stuff the body and continue crocheting.

47 rnd: (4 sc, dec) х 6 (30)

48 rnd: (3 sc, dec) х 6 (24)

49 rnd: (2 sc, dec) х 6 (18)

Stuff the body tightly. Place the head joint, the diameter of the joint is 36 mm.

50-53 rnd (4 rnds): 18 sc (18)

54 rnd: (sc, dec) х 6 (12)

55 rnd: dec х 6 (6)

Fasten off, cut and weave in ends.

Step 4. Knit head for a bunny (head)

Work with beige yarn, hook №3

The marker indicating the beginning of each round should be at the back of the head.

1 rnd: MR (6)

2 rnd: inc х 6 (12)

3 rnd: (sc, inc) х 6 (18)

4 rnd: (2 sc, inc) х 6 (24)

5 rnd: (3 sc, inc) х 6 (30)

6 rnd: (4 sc, inc) х 6 (36)

7 rnd: (5 sc, inc) х 6 (42)

8 rnd: (6 sc, inc) х 6 (48)

9 rnd: (7 sc, inc) х 6 (54)

10 rnd: (8 sc, inc) х 6 (60)

11 rnd: (9 sc, inc) х 6 (66)

12 rnd: (10 sc, inc) х 6 (72)

13-14 rnd (2 rnds): 72 sc (72)

15 rnd: (11 sc, inc) х 6 (78)

16 rnd: (12 sc, inc) х 6 (84)

17 rnd: (13 sc, inc) х 6 (90)

18 rnd: (14 sc, inc) х 6 (96)

19 rnd: (15 sc, inc) х 6 (102)

20-27 rnd (8 rnds): 102 sc (102)

28 rnd: 21 sc, dec x 12, 12 sc, dec x 12, 21 sc (78)

29-30 rnd (2 rnds): 78 sc (78)

31 rnd: (11 sc, dec) х 6 (72)

32-33 rnd (2 rnds): 72 sc (72)

34 rnd: (10 sc, dec) х 6 (66)

35-36 rnd (2 rnds): 66 sc (66)

37 rnd: (9 sc, dec) х 6 (60)

38 rnd: 60 sc (60)

39 rnd: (8 sc, dec) х 6 (54)

40 rnd: (7 sc, dec) х 6 (48)

Place the joint and fix the head, continue crocheting.

41 rnd: (6 sc, dec) х 6 (42)

42 rnd: (5 sc, dec) х 6 (36)

43 rnd: 36 sc (36)

Stuff more tightly.

44 rnd: (4 sc, dec) х 6 (30)

45 rnd: (3 sc, dec) х 6 (24)

46 rnd: (2 sc, dec) х 6 (18)

47 rnd: (sc, dec) х 6 (12)

48 rnd: dec х 6 (6)

Fasten off, cut and weave in ends.

Step 5. Knit ears for a bunny (ears)

Work with beige yarn, in turning rows, hook №3

1 rnd: 2 ch

2 rnd: into the 2nd loop from the hook 3 sc (3)

3 rnd: ch, turn, inc, sc, inc (5)

4 rnd; ch, turn, (sc, inc) х 2, sc (7)

5 rnd: ch, turn, (inc, sc) х 3, inc (11)

6-7 rnd (2 rnds): ch, turn, 11 sc (11)

8 rnd: ch, turn, (inc. sc) х 5, inc (17)

9-10 rnd (2 rnds): ch, turn, 17 sc (17)

11 rnd: ch, turn, (sc. inc) х 8, sc (25)

12-14 rnd (3 rnds):ch, turn, 25 sc (25)

15 rnd: ch, turn, (inc, sc) х 12, inc (38)

16 -17 rnd (2 rnds): ch, turn, 38 sc (38)

18 rnd: ch, turn, 3 sc, (dec, 4 sc) х 5, dec, 3 sc (32)

19 rnd: ch, turn, 3 sc, (dec, 4 sc) х 4, dec, 3 sc (27)

20 rnd: ch, turn, 27 sc (27)

21 rnd: ch, turn, (3 sc, dec) х 3, 2 sc, (dec, 3 sc) х 2 (22)

22-28 rnd (7 rnds): ch, turn, 22 sc (22)

29 rnd: ch, turn, (6 sc, dec) х 2, 6 sc (20)

30-43 rnd (14 rnds): ch, turn, 20 sc (20)

44 rnd: ch, turn, 5 sc, dec, 6 sc, dec, 5 sc (18)

45-51 rnd (7 rnds): ch, turn, 18 sc (18)

52 rnd: ch, turn, 5 sc, dec, 4 sc, dec, 5 sc (16)

53-57 rnd (5 rnds): ch, turn, 16 sc (16)

58 rnd: ch, turn, (4 sc. dec) х 2, 4 sc (14)

59-63 rnd (5 rnds): ch, turn, 14 sc (14)

64 rnd: ch, turn, 3 sc, dec, 4 sc, dec, 3 sc (12)

65 rnd: ch, turn, 12 sc (12)

Fasten off, leave 25 cm tail for sewing and cut off.

Crochet the second ear.

Please note: if the ears are wrinkled, careful steaming could help.

Step 6. Bunny decoration

1. Tighten the faces

Outline the points for sculpting on the face of a bunny to form eyeholes and mouth.

At this point, fix the thread (I advise using the yarn you used to crochet the head) under

the chin and draw the needle upwards to point 1, the needle passes inside the head.

Insert the needle in the point of the mouth 0 and pull it out upwards to point 1 (right

eye), the needle passes inside the head. Skip 10 stitches, insert the needle in point 2 and

pull it out in the point of the mouth, tighten. Repeat the above-mentioned steps,

tightening the thread. Repeat the instructions for the left eye, at the end tie a strong

knot.

Attach the eyes, embroider the nose, and embroider brows and mouth. You can slightly

tone the mouth and the areas around the eyes.

Please see the scheme of face sculpting.

2. Ears and heels decoration.

Outline the contour of the ear on fabric and cut out two parts (they should be the same

size as the ears or slightly larger). Sew the cut parts with an invisible stitch, folding the

excess fabric inward.

Crochet round the ears in sc.

Sew ears in a position at your discretion.

Step 7. Crochet overalls for the bunnyaviator

Work with brown yarn, 3 mm crochet hook.

Crochet the right overalls leg.

1 rnd: 38 ch, join to make a circle (38)

2-21 rnds (20 rnds): 38 sc (38)

Fasten off and cut the thread.

Crochet the left overalls leg in the same way.

Do not cut the yarn; continue crocheting joining right and left legs together.

Join the thread at the point you finished crocheting the right leg, put a marker, this will

be the beginning of the rounds and continue crocheting:

22 rnd: 38 sc along the right leg, 38 sc along the left leg (76)

23-30 rnds (8 rnds): 76 sc (76)

31 rnd: (17 sc, dec) х 4 (72)

32 rnd: 72 sc (72)

33 rnd: (6 sc, dec) х 8 (64)

34 rnd: 64 sc (64)

35 rnd: (6 sc, dec) х 8 (56)

36-38 rnds (3 rnds): 56 sc (56)

39 rnd: (5 sc, dec) х 8 (48)

40-41 rnds (2 rnds) 48 sc (48)

The thread can stay uncut.

Crochet the chest part.

At the front of the trousers find the middle, count 7

stitches to the right and 7 stitches left, crochet in turning

rows:

1-12 rnd (12 rnds): ch, turn, 14 sc (14)

Fasten off and cut the thread.

Crochet the overalls strap.

Count 9 stitches to the right from the chest part join the thread and crochet the strap in

turning rows.

1-21 rnd (21 rnds): ch, turn, 5 sc (5)

22 rnd: ch, turn, dec, sc, dec (3)

Crochet a buttonhole for a button: 6 ch

Fasten off and cut the thread.

Crochet the second strap in the same way, count 9 stitches to the left from the chest part,

join the thread and crochet the strap in turning rows with 6 stitches gap between the

straps.

Make a pocket for the overalls.

Work with gray yarn, 3 mm crochet hook.

1 rnd: 10 ch, into the 2nd loop from the hook: 9 sc (9)

2-13 rnds (12 rnds): ch, turn, 9 sc (9)

Fasten off and cut the thread.

Crochet 2 details. Sew to overalls.

Decorative stitch: with a needle and beige thread we walk in a simple step around the

entire perimeter of the legs and the bottom of the legs. Sew buttons.

All our overalls are ready!

8 Step. Helmet for the bunny aviator

Work with dark brown yarn, 3 mm crochet hook.

1 rnd: 6 MR (6)

2 rnd: inc х 6 (12)

3 rnd: (sc, inc) х 6 (18)

4 rnd: ( 2 sc, inc) х 6 (24)

5 rnd: ( 3 sc, inc) х 6 (30)

6 rnd: ( 4 sc, inc) х 6 (36)

7 rnd: ( 5 sc, inc) х 6 (42)

8 rnd: ( 6 sc, inc) х 6 (48)

9-10 rnds (2 rnds): 48 sc (48)

11 rnd: (7 sc, inc) х 6 (54)

12 rnd: 54 sc (54)

13 rnd: (8 sc, inc) х 6 (60)

14 rnd: (9 sc, inc) х 6 (66)

15-16 rnds (2 rnds): 66 sc (66)

17 rnd: (10 sc, ins) х 6 (72)

18-23 rnds (6 rnds): 72 sc (72)

Crochet ears:

24 rnd: 23 sc, turn, ch, 12 sc (12)

25-32 rnds (8 rnds): ch, turn, 12 sc (12)

33 rnd: ch, turn, (2 sc, dec) х 3 (9)

34 rnd: ch, turn, (sc, dec) х 3 (6)

35 rnd: ch, turn, 6 (6)

36 rnd: ch, turn, dec х 3 (3)

Crochet the second ear: 11 sc along ear, 38 sc along helmet.

37- 44 rnds: (8 rnds): ch, turn, 12 sc (12)

33 rnd: ch, turn, (2 sc, dec) х 3 (9)

34 rnd: ch, turn, (sc, dec) х 3 (6)

35 rnd: ch, turn, 6 sc (6)

36 rnd: ch, turn, dec х 3 (3)

Fasten off and cut the thread.

Crochet beige yarn around the perimeter of

the helmet.

Knit crochet straps for helmet.

Attach to the end of the eyelet a black thread in 2 threads and crochet: 25 ch

Tie a knot and cut the thread.

Second ear do exactly the same.

9 Step. Crochet a scarf for the bunny aviator

Work with milk color yarn, 3 mm crochet hook.

1 rnd: 81 ch, into the 2nd loop from the hook 80 сбн (80)

2 – 9 rnds (8 rnds): ch, turn, 80 sc Work in back loop only (80)

Fasten off and cut the thread.

Make a fringe for a scarf.

Wind the thread on cardboard, cut it on one side. Attach each thread with a hook to the

base of the scarf and tie it to a knot.

The scarf is ready!

10 Step. Glasses for the bunny aviator

Cut 2 circles of hard polyethylene (I use a file transparent for papers), 3 cm \ 1.18 inch in

diameter. In each circle, I use the awl to make 17 holes-holes equidistant from each other.

The edge of the circle is painted with black acrylic paint.

Make the left side of the glasses.

Attach the black thread to the circle, hook No. 1.25:

1 rnd: sl st, (ch, sc) х 16, ch, sl st (32)

Bunny aviator Joe / CROCHET 19

2 rnd: ch, 32 sc, sl st (32)

3 rnd: ch, 32 sc Work in back loop only, sl st (32)

4 rnd: ch, (4 sc, dec) х 5, 2 sc (27)

5 rnd: 56 ch, into the 3rd

loop from the hook 53 dc, sl st.

Fasten off and cut the thread.

Make the right side of the glasses.

Attach the black thread to the circle, hook No. 1.25:

1 rnd: sl st, (ch, sc) х 16, ch, sl st (32)

2 rnd: ch, 32 sc, sl st (32)

3 rnd: ch, 32 sc Work in back loop only, sl st (32)

4 rnd: ch, (4 sc, dec) х 5, 2 sc (27)

Connect the left and right side of the glasses:

5 rnd: 3 ch, sl st with the left side glasses, turn (3 sc, sl st) x 3 (3)

6 rnd: 16 sl st on the edge of the glasses, 56 ch, into the 3rd

loop from the hook 53 dc, sl st.

Fasten off and cut the thread.

Bunny is ready….

More Amigurumi Bunny Ideas: