Body
Blue yarn:
1st row: 6 Sat in the Amigurumi ring ( 6 )
2nd row: 2 Sat in each loop ( 12 )
3 row: * 1 Sat, increase * — 6 times ( 18 )
4 row: * 2 Sat, increase * — 6 times ( 24 )
5 row: * 3 Sat, increase * — 6 times ( 30 )
6 row: * 4 Sat, increase * — 6 times ( 36 )
7 row: * 5 Sat, increase * — 6 times ( 42 )
8 row: * 6 Sat, increase * — 6 times ( 48 )
9 row: * 7 Sat, increase * — 6 times ( 54 )
10-23 row: knit unchanged ( 54 )
Sew your eyes at 12 rows. Remember to leave enough room for the beak.
Sew out the red cheeks.
24 row: * decrease, 7 Sat * — 6 times ( 48 )
25 row: * decrease, 6 Sat * — 6 times ( 42 )
26 row: * decrease, 5 Sat * — 6 times ( 36 )
27 row: * decrease, 4 Sat * — 6 times ( 30 )
28 row: * decrease, 3 Sat * — 6 times ( 24 )
29 row: * decrease, 2 Sat * — 6 times ( 18 )
Start stuffing your body. Add some small pebbles at the bottom of the body so that the penguin can stand confidently.
30 row: * decrease, 1 Sat * — 6 times ( 12 )
31 row: * decrease * — 6 times ( 6 )
Fasten the thread and refuel the ponytail.

Beak
Yarn yellow:
1st row: 7 Sat in the Amigurumi ring ( 7 )
2nd row: 2 Sat in each loop ( 14 )
3rd row: unchanged ( 14 )
Fasten the thread and leave a long end for sewing.

Zhivotok
Straight white:
1st row: 6 Sat in the Amigurumi ring ( 6 )
2nd row: 2 Sat in each loop ( 12 )
3 row: * 1 Sat, increase * — 6 times ( 18 )
4 row: * 2 Sat, increase * — 6 times ( 24 )
5 row: * 3 Sat, increase * — 6 times ( 30 )
6-15 row: unchanged ( 30 )
Fasten the thread and leave a long end for sewing.

Legs ( 2 details )
Yarn yellow:
1st row: 5 Sat in the Amigurumi ring ( 5 )
2nd row: 2 Sat in each loop ( 10 )
3 row: * increase, 1sbn * — 5 times ( 15 )
4-7 row: unchanged ( 15 )
flatten the part.
8 row: Sat through both sides, 2 vp, Sat in the same loop, 1 half-column without cape in the next. loop, 3 half-column with a cape in the next. loop, 1 loop skip, 1 half-column without caption next. loop, 1 Sat next. loop, 2vp, chain 2, Sat in the same loop, 1 half-column without caption next. loop.
Fasten the thread and leave a long end for sewing.

Paws ( 2 details )
1st row: 5 Sat in the Amigurumi ring ( 5 )
2nd row: 2 Sat in each loop ( 10 )
3-8 row: unchanged ( 10 )
Fasten the thread and leave a long end for sewing.

Sailor’s hat
White yarn:
1st row: 6 Sat in the Amigurumi ring ( 6 )
2nd row: 2 Sat in each loop ( 12 )
3 row: * 1 Sat, increase * — 6 times ( 18 )
4 – 5 row: unchanged ( 18 )
6 row: 2 Sat in each loop ( 36 )
7 row: decrease in each loop ( 18 )
Attach a blue thread. Leave the long end of the white yarn for sewing.
8 row: * increase, 1 Sat *, — 9 times ( 27 )
Fasten the thread and refuel the ponytail.

Butterfly
Red threads of the muline:
Chain of 5 wp
1 row: start with the 2nd loop from the hook, the Sat in the following 3 loops, 3 Sat in the last loop.
2nd row: turn knitting, Sat in the following 3 loops, 3 Sat in the last loop.
3 row: turn again, Sat in the following 3 loops, 3 Sat in the last loop.
Fasten the thread and leave a long end for sewing.
With a red thread of the mulina, wrap the part in the middle three times to visually divide it into two parts. Tighten the knot from behind.

Assembly
Sew the beak
Sew a white tummy on your body
Attach feet and legs
Add a little filler to the cap so that it takes shape. Sew it to your head so that later you can wrap the fields of the hat.
Sew a red butterfly.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Materials:
Yarn – I would recommend using yarn of the same brand (or that you know will work up to the same size) for the body and coat to avoid a poor fit. Even if two yarns are listed as the same weight / size, there is quite often a big difference between different brands.
For the purple penguin I have used:
– Colour (A), Made by Penguins, DK / Light Worsted Baby Alpaca, Blackberry, approx. 25g
– Colour (B), Novita DK Baby Merino, Cream, approx. 20g
– Colour (C), Ricorumi DK Cotton, pale yellow, approx. 10g
– Small amount of black and yellow thread for embroidery
– Recommended hook size: 2.5mm (the example penguin was made with a 2.5mm hook)
– Safety eyes: 6 mm x 2 – safety eyes are not recommended for young children.
– Toy stuffing
– Tapestry needle for construction and embroidery
– Stitch marker
– Blush
– Size: approx. 5 inches tall when made with a 2.5mm hook

Abbreviations:
Ch. Chain
MR. Magic Ring
St. Stitch
SS. Slip stitch
Sc. Single crochet
Sc inc. Single crochet increase
Sc dec. Single crochet invisible decrease BLO. Back loops only
FLO. Front loops only

The Coat
Use yarn A.
Ch 13
1. Work this round in BLO, Sc in 2nd Ch from your hook, Sc x 10, (Sc x 3) in the last Ch
Now work down the other side of your foundation chain.
Sc x 10, Sc inc (26)
Work in continuous rounds.
2. Sc inc, Sc x 10, Sc inc x 3, Sc x 10, Sc inc x 2 (32)
3. Sc, Sc inc, Sc x 10, (Sc, Sc inc) x 3, Sc x 10, (Sc, Sc inc) x 2 (38)
4. Sc x 2, Sc inc, Sc x 10, (Sc x 2, Sc inc) x 3, Sc x 10, (Sc x 2, Sc inc) x 2 (44)
5. Sc x 3, Sc inc, Sc x 10 (Sc x3, Sc inc) x 3, Sc x 10, (Sc x 3, Sc inc) x 2 (50)
6. Sc x 4, Sc inc, Sc x 10, (Sc x 4, Sc inc) x 3, Sc x 10, (Sc x 4, Sc inc) x 2 (56)
7. Sc inc, Sc x 15, (Sc inc, Sc x 5) x 3, Sc x 10, (Sc inc, Sc x 5) x 2 (62)
8-16. Sc x 62 (62) 9 rounds
17. Sc x 8, Sc dec, Sc x 10, Sc dec, Sc x 2,

Mark the stitch just made with a stitch marker.
Sc x 5, Sc dec, Sc x 8, Sc dec, Sc x 10, Sc dec, Sc x 7, Sc dec (56)
SS, break yarn & pull through. Leave a long tail for sewing later.

The Beak
Attach yarn A where you placed your stitch marker on round 17 of the coat. Now place your stitch marker 1 stitch back from where you have just joined your yarn.
This section is worked in rows. We will Ch 1 and turn at the end of each row.

Ch 1. Your first Sc will be made in the same St where you have just joined your yarn
1. Sc x 14 (14)
2. Sc dec, Sc x 10, Sc dec (12)
3. Sc dec, Sc x 8, Sc dec (10)
4. Sc dec, Sc x 6, Sc dec (8)
5. Sc dec, Sc x 4, Sc dec (6)
6. Sc x 6 (6)
7. Sc dec, Sc x 2, Sc dec (4)
8. Sc x 4 (4)
9. Sc dec x 2 (2)
10. Sc x 2 (2)
11. Sc dec (1)
12. Sc x 1 (1) Do not Ch 1 & turn here.
Break yarn & pull through. Weave in the loose end.
We will now Sc around the edge of the beak.
Join yarn A where your stitch marker is now placed (this should be one stitch back from where you joined your yarn to start the beak.
Ch 1 and SS on to the side of the beak.
Sc up the edge until you reach the point of the beak.
Make 3 Sc in the final St from row 12 of the beak. This should give you a nice point.
Sc back down the other side of the beak. SS back on to the next stitch on the coat. Break yarn and pull through. Weave in the loose end.
With yellow thread embroider a small triangle on the tip of the beak.

The Body
Use yarn B and work in continuous rounds.
1. Sc x 6 in to a MR (6)
2. Sc inc x 6 (12)
3. (Sc, sc inc) x 6 (18)
4. (Sc x 2, sc inc) x 6 (24)
5. (Sc x 3, sc inc) x 6 (30)
6. (Sc x 4, sc inc) x 6 (36)
7. (Sc x 5, sc inc) x 6 (42)
8-25. Sc x 42 (42) – 18 rounds Insert the safety eyes between rounds 14 -15. There should be a 9 stitch gap between the eyes. Stuff the body. Continue to stuff the remainder as you go.
To check you are happy with the position of your safety eyes and the amount you are stuffing you can try the coat on the body now and then. They eyes should be about level with the yellow embroidery on the beak and about half way between this and the sides of the coat.
26. (Sc x 5, sc dec) x 6 (36)
27. (Sc x 4, sc dec) x 6 (30)
28. (Sc x 3, sc dec) x 6 (24)
29. (Sc x 2, sc dec) x 6 (18)
30. (Sc, sc dec) x 6 (12)
31. Sc dec x 6 (6)
SS in to the next stitch, break yarn & pull through. Try the coat on the body again. Ensure you are happy that you have placed enough stuffing. Weave the loose end through the FLO of the final row of the body to close off the end.
Optional detail
With a strand of black thread embroider the eyebrows 3 rounds above the eyes over r 10-11
Use a small amount of blush to create rosy cheeks on the lower border of the eyes.

The Flippers
Use yarn A & make 2. Work in continuous rounds.
1. Sc x 4 in to a MR (4)
2. (Sc, Sc inc) x 2 (6)
3. (Sc x 2, Sc inc) x 2 (8)
4. (Sc x 3, Sc inc) x 2 (10)
5. (Sc x 4, Sc inc) x 2 (12)
6. (Sc x 5, Sc inc) x 2 (14)
7. (Sc x 6, Sc inc) x 2 (16)
8. (Sc x 7, Sc inc) x 2 (18)
9. Sc x 18 (18)
10. (Sc x 7, Sc dec) x 2 (16)
11. Sc x 16 (16)
12. (Sc x 6, Sc dec) x 2 (14)
13. Sc x 14 (14)
14. Sc dec x 7 (7)
Break yarn & pull through. Leave a long length for sewing. Fold the flipper flat and sew the top closed prior to attaching.

The Feet
Use yarn C and make 2. Ch 7
1. In BLO, Sc in the 2nd Ch from your hook, Sc x 4, (3 Sc) in the last Ch.
Now work down the other side of your foundation chain
Sc x 4, Sc inc (14)
Work in continuous rounds.
2. Sc inc, Sc x 4, Sc inc x 3, Sc x 4, Sc inc x 2 (20)
3. Sc, Sc inc, Sc x 4, (Sc, Sc inc) x 3, Sc x 4, (Sc, Sc inc) x 2 (26)
SS, break yarn & pull through. Leave a long tail for sewing.
Fold the foot in half. Sew around the edges to secure this.

Construction

Place the coat on the body. The little yellow beak should sit equal distance between the eyes. Pin in place and sew the coat to the body. You can use either a whip stitch or a mattress stitch for this.

Sew the feet to the body. The flat end of the feet should point outward.
Sew the top of the curved section to the base of the coat.
Sew the flippers to the sides of the coat. The top of the flipper is about level with the eyes.
Congratulations your Cute Penguin is complete!!


More Amigurumi Penguin Ideas: