You will need:
Knitting hook 3.5mm
Double connection yarn twisted from 8 threads – Patons Cotton Blend
A shady needle or needle with a large ear
Scissors

Yarn colors:
( Palette of used colors )
Bright red
Orange
White

Dimensions:
Scheme for sizes for 0-6 months. For 6-12 months, see in parentheses.

Succession Length:
For 0-6 months – 9cm
For 6-12 months – 10cm

Abbreviations:
VP – air loop
SSN — cape with cape
PSN – half-column with nakid
SBN – pillar without cape
SS – connection column
Following. – next ( loop )
p – loop
*…* — repeat the indicated number of times from the asterisk to the asterisk
SBN decrease – tie 2 columns together as 1 SBN
PSN decrease — tie 2 columns together as 1 PSN
SSN decrease — tie 2 columns together as 1 CCH

Knitting density:
1 inch = 4 rows of 5 PSN

Calling Scheme
Take a 3.5mm knitting hook and yarn bright red, type 11 VP ( 13 VP ).
We knit on the spiral.
1 row – 2 PSN in the second hook loop. Next 8 ( 10 ) p 1 PSN. 6 PSN in the last VP. ( Note: now we begin to knit on the other side of the typed chain ). Next 8 ( 10 ) p 1 PSN. 2 PSN in the last p. Total number of loops 26 ( 30 ).

2 row – in the first 2 p to 2 PSN. Next 8 ( 10 ) p 1 PSN, next. 6 p on 2 CCN, 1 PSN per next. 8 ( 10 ) p, 2 PSN per next. 2 loops. Total number of loops 36 ( 40 ).

3 row – in the first 2 p to 1 PSN., Next. 3 p 2 PSN, next. 5 ( 7 ) p 1 PSN, next. 3 p to 1 CCN, * 2 CCN in one p, 1 CCN per next. p * — repeat 6 times. Following. 3 p to 1 CCN. Following. 5 ( 7 ) p 1 PSN. Following. 2 p to 2 PNS, 1 PSN and 1 SBN in the last p. Complete the row using the SS. Total number of loops 48 ( 52 ). Trim the thread and refuel the remaining tail.

Tie the sole for the second kicking.

Dumb
We knit on the spiral.
1 row — start knitting from the middle of the ass, fixing the thread bright red. 1 VP, 1 SBN in the same p, but only behind the back wall. ( Note: continue knitting on the back wall of the loop ). Next 47 ( 51 ) p 1 SBN.

2-3 row — 1 SBN in each p in a circle.

Note: if you knit for a size of 6-12 months, then tie another 1 additional row.

4 row – next. 14 ( 16 ) p 1 SBN, * 1 SBN decrease, 1 SBN next. p * — repeat 7 times. Next 13 ( 15 ) p 1 SBN. Total number of loops 41 ( 45 ).

5 row – in the first p 1 SBN, 1 decrease in SBN, next. 10 ( 12 ) p 1 SBN, * 1 decrease in SBN, 1 SBN per next. p* — repeat 5 times. Following. 10 ( 12 ) p 1 SBN, 1 SBN decrease, 1 SBN in the last p. Total number of loops 34 ( 38 ).

6 row – in the following. 11 ( 13 ) p 1SBN, 2 SPN decreases, 2 SSN decreases, 2 PSN decreases. Next 11 ( 13 ) p 1 SBN. Total number of loops 28 ( 32 ).

7 row – 1 SBN in each p in a circle. Complete the row using the SS. Trim the thread and refuel the remaining tail.

Repeat knitting according to the scheme for the second tweezers.

Eyes
We knit on the spiral.
1 row – take a hook for knitting 3.5mm and yarn white, type 2 VP. In the first p 6 SBN. Total number of loops 6.

2 row – 2 SBN in each p in a circle. Total number of loops 12.

3 row – 1 SBN in each p in a circle.

4th row – 6 SBN dodges. Complete the row using the SS. Total number of loops 6. Trim the thread and hide the remaining ponytail.

Repeat knitting according to the scheme 4 times for 2 pairs of eyes.
Take the heel needle and sew 2 eyes on the front side of the knitted kennels, closer to the top.

Zrachki
Take a 3.5mm knitting hook and a black yarn, dial 2 VP. In the first p 6 SBN. Complete the row using the SS. Total number of loops 6. Trim the thread and hide the remaining ponytail.
Repeat knitting according to the scheme 4 times for 2 pairs of pupils.
Take the heel needle and sew 1 handle in the center of each eye.

Nose
We knit on the spiral.
1 row — Take a hook for knitting 3.5mm and yarn orange, type 2 VP. In the first p 6 SBN. Total number of loops 6.

2 row – 2 SBN in each p in a circle. Total number of loops 12.

3 row – 1 SBN in each p in a circle.

4th row – 6 SBN dodges. Complete the row using the SS. Total number of loops 6. Trim the thread and hide the remaining ponytail.

Repeat knitting according to the scheme for 2 noses. Take the heel needle and sew 1 nose into the center of each tweezers, immediately under the eyes.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

To work, you will need:
Yarn yellow, blue, black, white;
Beads or half beads for the eyes;
Hook, filler

Abbreviations:
st.-column without cloak
cc connection column
pr.-additive ( in one loop two columns )
ub ( two tables tied together )

Head body:
We knit yellow yarn
1 RUR 6 in the ring
2 r. pr. 6 times ( 12 )
3r. 91st, pr. ) 6 times ( 18 )
4 RUR ( 2st, pr. ) 6 times ( 24 )
5 RUR ( 3rd, pr. ) 6 times ( 30 )
6 RUR ( 4st, pr. ) 6 times ( 36 )
7 RUR ( 5st, pr. ) 6 times ( 42 )
8 RUR ( 6st, pr. ) 6 times ( 48 )
9 RUR ( 7st, pr. ) 6 times ( 54 )
10 RUR ( 8st, pr ) 6 times ( 60 )
11-31 RUR — 60st
32 RUR ( 8st, ub ) 6 times ( 54 )
33r. ( 7st, ub ) 6 times ( 48 )
34 RUR ( 6st, Ub ) 6 times ( 42st )
35 RUR ( 5st, ub ) 6 times ( 36 )
As we knit, we fill the part
36r – ( 4st, ub ) 6 times ( 30 )
37r – ( 3st, ub ) 6 times ( 24 )
38r- ( 2st, ub ) 6 times ( 18 )
39r- ( 1st, ub ) 6 times ( 12 )
40r- UB 6 times ( 6 )
We turn over the parting, the beginning of knitting – it will be the head, and we will put the loops in a cone.

Combine:
We knit blue yarn
1 RUR 6 in the ring
2 r. pr. 6 times ( 12 )
3r. 91st, pr. ) 6 times ( 18 )
4 RUR ( 2st, pr. ) 6 times ( 24 )
5 RUR ( 3rd, pr. ) 6 times ( 30 )
6 RUR ( 4st, pr. ) 6 times ( 36 )
7 RUR ( 5st, pr. ) 6 times ( 42 )
8 RUR ( 6st, pr. ) 6 times ( 48 )
9 RUR ( 7st, pr. ) 6 times ( 54 )
10 RUR ( 8st, pr ) 6 times ( 60 )
11-14 r. 60st, turn the knitting to tie in front of the jumpsuit
Now we knit in rotary rows, at the beginning of each row an air loop of lifting
15 RUR 14st, ( 14 )
16 r. 1vp 14st ( 14 )
17 r. 1vp, ub, 10st, ub ( 12 )
18 RUR 1vp, 12st ( 12 )
19 RUR 1vp, ub, 8st, ub ( 10st ), cut off the thread.

Count 16 columns on 10 row of pants on the front
knitting, we attach the blue thread to the 17th column and knit the back in the same rotary rows:
1 RUR 14st ( 14 )
2p 1vp, 14st ( 14 )
3r. 1vp, ub. 10st, ub ( 12 )
4 r. 1vp, 12st ( 12 )
5 r. 1vp, ub, 8st, ub ( 10 )
6 r. 1vp, 10st ( 10 )

Now we proceed to strapping the jumpsuit so that all the edges are smooth. So, we knit further on the side of the back down 5st, then 16st ( which we missed ), side rise 5st, 23 air loops for the straps, go back 22 columns, at the top of the back 10st, 23v for the strap, back 22sbn, sideways down 5st, 16st straight, 5st rise, finish knitting, fix the thread.

Pocket:
In blue
1 RUR 5 in the ring, but do not close, then turn rows
2nd pr.5 times ( 10 )
3r. 10st
further down the top of the pocket 7ss, leave the thread for sewing.

Shoes:
We knit black yarn
1 RUR 6 in the ring
2 r. pr. 6 times ( 12 )
3-4 r. 12st
5r. ( 4st, ub ) 2raza ( 10 )
6-9 RUR 10st
Insert cardboard in boot size. I just stuffed a little with a synthepon.
Sew the edges with a needle.

Legs:
We knit blue thread:
1 RUR 6 in the ring
2 r. pr. 6 times ( 12 )
3r. for the back wall 12st
4 RUR ( 3st, pr ) 3raza ( 15st )
5 RUR 15st
I tied a little differently. Right on the boot scored 12 columns and further on
the diagram above ( only in the 3rd row did not knit for the back wall ). We sew legs to the boots for the front hinges of the 3rd row. We fill, sew to the body.

Hands:
We start with a black thread:
1 RUR 6 in the ring
2 r. pr.6 r ( 12 )
3-5 r. 12st
6 r. 5ub ( 7 )
Change to yellow thread, leave black before knitting
7r. for the back wall 7st ( 7 )
8-16 r. 7st, fill
17 RUR 2 kill, finish knittingManzet: We take the black thread that we left and knit on the front wall of the 7th row 1p 2st, pr, 3st, pr ( 9 ) 2 r. 9st, cut off the thread

Eyes:
White thread:
1 RUR 6 in the ring
2 r. pr. 6 times ( 12 )
3r. 91st, pr. ) 6 times ( 18 )
4 RUR ( 2st, pr. ) 6 times ( 24 )
Change the thread to gray and knit glasses
5 r. for the FRONT wall 24st
6-7 r. 24st
8 RUR ( 5st, pr ) 3 times ( 28st ), leave a long end for sewing
Sew the edge to the back wall of the 5th row from the outside

Glasses strap:
In black we type a chain of 45th century
2-3r. 44st ( sample by size, you may need more loops )
We collect our Minion. Sew overalls to the body, sew straps to the front and stick or sew black buttons. Focusing on the photo, sew a pocket, pens,
legs, eyes, strap for glasses, embroider a mouth. With a yellow thread we make stitches all over the edge of the ( jumpsuit at will ).

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

You will need:

• Knitting hook 12 mm or 10 mm
• Yarn Lion Brand Hometown ( 250gr ) – Super Bulky Yarn
• Scissors
• A shady needle or needle with a large ear

Size:
The diameter of – is approximately 42 inches, the width of – 14 inches.

Note: the size depends on the density of your knit.

Abbreviations:
VP – air loop
PSN – half-column with nakid
Following. – next ( loop )
p – loop
SS – connection column
*…* — repeat the indicated number of times from the asterisk to the asterisk

Take a hook of 12 mm and a yarn that you like the color and type 55 VP.

Note: if you use a 10 mm hook, then type 81 VP.

The diagram describes knitting using a 12 mm hook.

1 row – 3 VP, skip one p, 1 PSN next. n ( 5 loops ). *1 VP, skip one p, 1 PSN next. n * — repeat to the end of the row, make sure that in the last. n 1 PSN tied.

2 row – 2 VP, 1 PSN in the resulting arch of the previous row. *1 VP, skip one p, 1 PSN in the resulting arch of the previous row * — repeat to the end of the row, make sure that the PNS is tied into an arch of three VP typed in the previous row.

3-13 row – 2 VP, 1 PSN in the resulting arch of the previous row. *1 VP, skip one p, 1 PSN in the resulting arch of the previous row * — repeat until the end of the row, make sure that the PNS is tied into an arch of two VP typed in the previous row.

Note: if you use a 10 mm hook, then tie two more additional rows.

After completing all the rows, connect the two ends of the scarf together to make the ( snud ) and use the SS to tie them together.
Trim the thread and refuel the remaining tail.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Materials:
• Camvolous yarn of white and black. I have a regular acrylic yarn
• 5 mm hook ( H / 8 )
• Two white buttons ( about 2.5 cm in diameter )
• Gobel needle / thick needle

Designations:
VP – air loop
SBN – pillar without cape
PSN – half-column with nakid
CH – cloak column

The whole hat itself is made of white yarn. Other details – from black.
Size: 0-3 months
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5-10 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
11 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 44 SBN )

Size: 3-6 months
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6-11 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
12 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 48 SBN )

Size: 6-9 months
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6 circular row: * 2 CH in the first loop, 1 CH in the following 11 loops * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
7-12 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
13 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 52 SBN )

Size: 9-12 months ( will reach about 16 months )
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6 circular row: * 2 CH in the first loop, 1 CH in the following 11 loops * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
7 circular row: * 2 CH in the first loop, 1 CH in the next 12 loops * — repeat to the end of the row, connect, 2 VP rise ( 56 CH )
8-13 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 56 CH )
14 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 56 SBN )

Size: Preschooler
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6 circular row: * 2 CH in the first loop, 1 CH in the following 11 loops * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
7 circular row: * 2 CH in the first loop, 1 CH in the next 12 loops * — repeat to the end of the row, connect, 2 VP rise ( 56 CH )
8 circular row: * 2 CH in the first loop, 1 CH in the next 13 loops * — repeat to the end of the row, connect, 2 VP rise ( 60 CH )
9-14 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 60 CH )
15 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 60 SBN )

Size: Schoolboy ( elementary school )
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6 circular row: * 2 CH in the first loop, 1 CH in the following 11 loops * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
7 circular row: * 2 CH in the first loop, 1 CH in the next 12 loops * — repeat to the end of the row, connect, 2 VP rise ( 56 CH )
8 circular row: * 2 CH in the first loop, 1 CH in the next 13 loops * — repeat to the end of the row, connect, 2 VP rise ( 60 CH )
9 circular row: * 2 CH in the first loop, 1 CH in the next 14 loops * — repeat to the end of the row, connect, 2 VP rise ( 64 CH )
10-15 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 64 CH )
16 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix the end of the thread, hide the end of the thread ( 64 SBN )

Size: teenager / adult
Tie the magic ring, 11 SN in the magic ring, connect to the first SN, 2 VP rise
2 circular row: * 2 CH in each loop * — repeat to the end of the row, connect, 2 VP rise ( 22 CH )
3 circular row: * 2 SN in the first loop, 1 CH in the second * — repeat to the end of the row, connect, 2 VP rise ( 33 CH )
4 circular row: * 2 CH in the first loop, 1 CH in the next 2 loops * — repeat to the end of the row, connect, 2 VP rise ( 44 CH )
5 circular row: * 2 CH in the first loop, 1 CH in the next 10 loops * — repeat to the end of the row, connect, 2 VP rise ( 48 CH )
6 circular row: * 2 CH in the first loop, 1 CH in the following 11 loops * — repeat to the end of the row, connect, 2 VP rise ( 52 CH )
7 circular row: * 2 CH in the first loop, 1 CH in the next 12 loops * — repeat to the end of the row, connect, 2 VP rise ( 56 CH )
8 circular row: * 2 CH in the first loop, 1 CH in the next 13 loops * — repeat to the end of the row, connect, 2 VP rise ( 60 CH )
9 circular row: * 2 CH in the first loop, 1 CH in the next 14 loops * — repeat to the end of the row, connect, 2 VP rise ( 64 CH )
10 circular row: * 2 CH in the first loop, 1 CH in the next 15 loops * — repeat to the end of the row, connect, 2 VP rise ( 68 CH )
11-16 circular row: * SN in each loop * — repeat to the end of the row, connect, 2 VP rise ( 68 CH )
17 circular row: * SBN in each loop * — repeat to the end of the row, connect, fix and hide the end of the thread ( 68 SBN )

Spots around the eyes:
Black yarn
#1
7 VP, skip the first loop, 1 SBN in the next 6 loops, 3 SBN in the last loop. 1 SBN in each loop of the back of the VP chain, connect, 2 VP rise ( 13 SBN )
2 circular row: 2 CH in the first 3 loops, PSN in the next loop, SBN in the next, 2 SBN in the next 3 loops, 1 SBN in each loop to the end of the row, connect to the first SN. Fasten the end of the thread, leaving a long ponytail, then sew to the cap

#2
7 VP, skip the first loop, 1 SBN in the next 6 loops, 3 SBN in the last loop. 1 SBN in each loop of the back of the VP chain, connect, 1 VP rise ( 13 SBN )
2 circular row: SBN in the first 5 loops, 2 SBN in the following 3 loops, 1 SBN in the next, PSN, 2 SN in the last 3 loops, connect to the first SBN. Fasten the end of the thread, leaving a long ponytail, then sew to the cap
Place the associated spots so that the large edge of the spots is facing down and the thin / narrow look up. Use black yarn and needles to sew white buttons into the upper, narrower part of the spots. It will turn out eyes.

Nose:
We knit black yarn
Tie the magic ring. In the magic ring SN, PSN, 2 SBN, PSN, SN, PSN, 2 SBN, PSN, connect with the first SN. Stretch tight and sew to the cap.
Sew black yarn under your nose with a needle mouth or smile.

Panda ears ( do 2 ):
We knit black yarn
Tie the magic ring. In Magic Ring 2 PSN, connect, 1 VP rise ( 8 PSN )
2 circular row: * 2 PSN per loop * — repeat to the end of the row, connect, 1 VP rise ( 16 PSN )
3 circular row: * 2 PSN in the first loop, 1 PSN in the next * — repeat until the end of the row ( 24 PSN )
Fasten the end of the thread, leaving a long tail to sew on the sides of the cap.
For thicker ears, to better keep fit and not bend, make each ear double ( tie 4 ears and tie together 2 ).

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Symbols:
Satn – table without cape
pr – increase ( 2 Sat in one loop )
U – decrease
CA – amigurumi ring

Hands
1. 6 Sat in KA
2.6 pr ( 12 Satn )
3. ( 1 Sat, 1 pr ) * 6 = 18
4-5. 18 Sat
6. ( Satn, at ) * 6 = 12
7-9. 12 Sat. We fill the handle, we don’t need to fill the upper part, otherwise it will be ugly to stick out.
10. ( 4 Satn, ) * 2 = 10
11-13. 10 Sat
14. ( 3 Satn, ) * 2 = 8
15-19. 8 Sat
twenty. We fold the handle in half, and tie 3 Sat for both halves.

Nozhki
We knit two details. And here you are guided by your preferences. My panties are striped, with different strip thicknesses, you can make them one-ton or add more colors. I draw attention to the change of color, often a ugly bias is obtained, that is, colors change diagonally. To prevent this from happening, we make 1-2 displacement loops in a row where we change color.

We start with the main color of the panties
1.6 Sat
2.6 pr ( 12 Satn )
3. ( 1 Sat, 1 pr ) * 6 = 18
4. ( 2 Sat, 1 pr ) * 6 = 24
5-7. 24 Sat . MEET
8-10. 24 Sat + 1 loop offset change color
11-15. 24 Sat + 1 or 2 loops of displacement so that the change of color is in a straight line. Change color
16-18. 24 Sat. Change color
19-20. 24 Sat. On the first leg we cut the thread, on the second we leave.

Three
We combine the legs. We knit a thread of the same color. We collect 3 air hinges on the second leg, attach the first leg ( we pass the 2 legs through the loops remaining on the first leg, we carefully tighten everything so that there are no holes left ). Now we knit the Sat in every loop.

21. 24 Sat on the leg, 3 Sat on the chain of vp, 24 Sat on the leg, 3 Sat on the other side of the chain of vp ( 54 Satn ).
22-23. 54 Sat. Change color
24-26. 54 Sat. Change color
27-31. 54 Sat. We connect the thread of the color of the pens, knit the body. At the same time, we bring the thread of the color of the panties before work, we still need it.
32. For the back half-bangs with a knit of 54 pieces
For the front half-bangs, we knit 54 connecting columns with the thread of the color of the panties. Cut the thread, fix it.
We continue the thread of body color.
33-35. 54 Sat
We fill the legs tightly, most convenient at this stage. We fill the body in the course of knitting.
36. ( 7 Satn, ) * 6 = 48
37-38. 48 Sat
39. ( 6 Satn, ) * 6 = 42
40. ( 5 Satn, ) * 6 = 36
41. Join hands. They should be located exactly on the sides. 36 Sat.
42. ( 4 Sat, ) * 6 = 30
43. ( 3 Satn, ) * 6 = 24
44. ( 2 Satn, ) * 6 = 18
45.18 Sat

Voice
In order to get a beautiful head, we break the additives. In the neck area you need to fill tight so that your head does not fall. Stuff the antenna too!!!
46. ( 2 Sat, pr ) * 6 = 24
47. 1 Sat, pr, ( 3 Sat, pr ) * 5, 2 Sat = 30
48. ( 4 Sat, pr ) * 6 = 36
49.2 Satn, pr, ( 5 Sat, pr ) * 5, 3 Sat = 42
50. ( 6 Sat, pr ) * 6 = 48
51. 3 Sat, pr, ( 7 Sat, pr ) * 5, 4 Sat = 54
52. ( 8 Sat, pr ) * 6 = 60
53. 4 Sat, pr, ( 9 Sat, pr ) * 5, 5 Sat = 66
54-65. 66 Sat
66. 4 Sat, ( y, 9 Sat ) * 5, y, 5 Sat = 60
67. ( 8 Satn, ) * 6 = 54
68. 3 Sat, ( y, 7 Sat ) * 5, y, 4 Sat = 48
69. ( 6 Satn, ) * 6 = 42
70. 2 Satn, ( y, 5 Sat ) * 5, y, 3 Sat = 36
71. ( 4 Satn, ) * 6 = 30
72. Satn, ( y, 3 Sat ) * 5, y, 2 Sat = 24
73. ( 2 Sat, ) * 6 = 18
74. ( Satn, U ) * 6 = 12
75. ( 2 Satn, ) * 3 = 9
76-80. 9 Sat
81. 9 pr ( 18 )
82. ( 2 Sat, pr ) * 6 = 24
83-85. 24 Sat
86. ( 2 Sat, ) * 6 = 18
87. ( Satn, U ) * 6 = 12
88. 6

Eye
1. Black thread. 10 Sat in KA, ss.
2. The color of the iris. V.p. 10 pr., Ss.
3. White thread. 3 v.p. ( 1ssn, pr ) * 10, ss. Leave the stitch thread. We embroider the duc.

Kinds
On the back, attach a thread, tie a chain of cp. ( 20-22 ). We draw a Satn or Psn. The second knit is similar. In front of the strap we sew.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

You will need:
— Yarn Patons Canadiana ( 100 g / 187 m ) red ( 10628 or 10413 ) or golden ( 10610 ) 5 skeins.
— 5 mm hook or other to obtain the appropriate viscosity density.

Abbreviations:
vp = air loop
p. = loop
KR = Circular
SBN = pillar without cape
CH = cloak column
Bump = ( cape and tie the loop, cloak and stretch the thread through 2 loops on the hook ) x repeat 5 times in one loop. Then again cape and stretch the thread through all the hinges on the hook. Link to video lesson: https://www.youtube.com/watch?v=URp_U5L9cm4
connection Art. = connecting column

Dimensions:
Square with approximately 51 cm side

Ligidity of the viscosity:
14 CH and 7 rows = 10 cm

Description of the side of the pillow:
The front and back sides fit equally.
68 vp
Row 1: ( The market side ) 1 CH in 4 p. From the hook ( is counted for 2 CH ). 1 CH in each p. To the end of the row. Expand. 66 CH
Row 2: 1 vp 1 SBN in each of the first 3 SN. Bump next. CH. *1 SBN in each of the following 3 SN. Bump next. CH. Repeat from * to the last two p. 1 SBN in each of the last 2 loops. Expand.
Row 3: 3 vp ( are counted as CH ). 1 CH in each p. To the end of the row. Expand.
Row 4: 1 vp 1 SBN in each of the first 5 SN. Bump next. CH. *1 SBN in each of the following 3 SN. Bump next. CH. Repeat from * to the last four p. 1 SBN in each of the last 4 loops. Expand.
Row 5:3 vp ( are counted as CH ). 1 CH in each p. To the end of the row. Expand.

Repeat the last 4 rows until the size from the beginning is approximately 51 cm, finish face-to-face. Close the last loop.

Editing ( connection of the front and rear parts ):
KR 1: connect to each other with the help of a connection. Art. for any corner of the pillow. 1 pack. Continue working for both canvases, SBNs around three sides of the pillow, 3 SBN in each corner. Insert the pillow into the resulting pillow. Finish the circle of the SBN. Close the connection. Art. in the first SBN.
KR 2: 1 vp, continue knit from left to right, and not from right to left, as usual. Close the connection. İn the first SBN. Close the last loop.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

To tie Yarn with a hook we need:
— brown yarn — approx. 40 gr.;
— leftovers of white, lilac, red and blue yarn;
— some cardboard ( or flat plastic );
— filler ( syntepon );
— hook № 3.5.

Head + torso + legs:

1 row: draw with a thread of brown 3 percentage points and tie 1 tbsp. b / n in the second loop from the hook, 3 tbsp. b / n in one loop, turn knitting clockwise, 1 tbsp b / n in the initial loop [ = 6 ] 1 row: draw with a thread of brown 3 c.p. and tie 1 tbsp. b / n in the second loop from the hook, 3 tbsp. b/n in one loop, turn knitting clockwise, 1 bw / n in the initial loop [ = 6 ]

2nd row: increase * 6 times [ = 12 ]

3 row: ( increase, 1 tbsp. b / n ) * 6 times [ = 18 ].

4 row: ( increase, 2 tbsp. b / n *. Repeat * 6 times [ = 24 ].

5 row: tie Art. b / n, evenly distribute 2 additives [ = 26 ].

Tip: I recommend adding ( as well as reducing ) in this and subsequent rows to place on one line, i.e. strictly above each other.

6 row: tie Art. b / n, evenly distribute 2 additives [ = 28 ].

7 row: tie Art. b / n, evenly distribute 2 additives [ = 30 ]

8-11 rows ( 4 rows ): tie Art. b / n, without additives [ = 30 tbsp. b / n ];
Insert head template ( cardboard circle ).

12th row: tie Art. b / n, evenly distribute 2 decrease [ = 28 ]

13th row: tie Art. b / n, evenly distribute 2 decrease [ = 26 ]

14th row: tie Art. b / n, evenly distribute 2 decrease [ = 24 ]

15 row: ( decrease, 2 tbsp. b / n ) * 6 times [ = 18 ].

16 row: ( decrease, 1 tbsp. b / n ) * 6 times [ = 12 ]. Insert the filler in the front of the head, i.e. only above the cardboard ( the lower part of the head should be flat ).

We pass to knitting the body:

17 row: tie Art. b / n without additives / decrease [ = 12 ]

18 row: ( increase, 1 tbsp. b / n ) * 6 times [ = 18 ].

19th row: tie Art. b / n without additives / allowances [ = 18 ]

20 row: 1 tbsp. b / n, ( increase, 3 tbsp. b / n ) * 4 times, 1 tbsp. b / n [ = 22 ]

21-23 rows ( 3 rows ): tie Art. b / n without additives / allowances [ = 22 ]

24 row: tie Art. b / n, evenly distribute 2 additives [ = 24 ].

25 row: tie Art. b / n without additives / decrease [ = 24 ]

26 row: tie Art. b / n, evenly distribute 2 additives [ = 26 ].

27-31 rows ( 5 rows ): tie Art. b / n without additives / allowances [ = 26 ]. Insert a cardboard template.

32 row: We proceed to knit the legs, for this we divide the knitting into 2 equal parts and then knit in a circle each part separately ( first we untie one leg, and then the second ).
Each leg should be given 14 tbsp. b / n ( due to the fact that 2 columns at the place of separation of the legs are tied by the wallpaper of the legs )

33-41 rows ( 9 rows ): tie Art. b / n without additives / allowances [ = 14 ]

42 row: tie Art. b / n, evenly distribute 2 decrease [ = 12 ]

43 row: tie Art. b / n, evenly distribute 2 decrease [ = 10 ]

44 row: fold the knitting in half a flat and tie the front and back of the leg together with connecting columns. Tear off the thread.

Similarly, finish the second leg.

Pens ( 2 parts ):

1 row: draw a thread of brown 4 percentage points and tie 1 tbsp. b / n in the second loop from the hook, 1 tbsp. b / n, 3 tbsp. b / n in one loop, turn knitting clockwise, 1 tbsp. b / n, 1 tbsp b / n in the initial loop [ = 8 ]

2 row: ( increase, 1 tbsp. b / n ) * 4 times [ = 12 ]

3-4 rows ( 2 rows ): tie Art. b / n without additives / allowances [ = 12 ]

5 row: 9 tbsp. b / n, increase, 2 tbsp. b / n [ = 13 ]

6 row: 2 tbsp. b / n, decrease, 9 tbsp. b / n [ = 12 ]

7 row: tie Art. b / n without additives / decrease [ = 12 ]

8 row: 1 tbsp. b / n, increase, 4 tbsp. b / n, decrease, 4 tbsp. b / n [ = 12 ]

9th row: tie Art. b / n without additives / allowances [ = 12 ]

10 row: increase, 4 tbsp. b / n, decrease, 5 tbsp. b / n [ = 12 ]

11 row: 9 tbsp. b / n, 5 csoed. Art. 6 tbsp b / n, 1 soyed. Art. Tear off the thread.

Put the filler in the pens and sew their body.

Registration:

— white strips for decoration, mouth, eyebrows are tied like chains of air loops and sewn.
— the eyes and buttons are as follows:

1 row: dial 2 percentage points and lock in the ring. To draw 6 tbsp b / n. [ = 6 ]. Next knit in a circle;

2 row: 6 tbsp. b / n [ = 6 ].

Congratulations, you can put the hook aside and admire your creation.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

You will need:

• yarn YarnArtJeans ( gray ( 49 ) and blue ( 15 ) colors );
• knitting hook: 1.75 mm ( 3.5 mm is recommended for knitting this yarn, but a smaller hook is used in the work for more dense knitting );
• a needle with a wide ear;
• — polyfill filler.

Abbreviations
VP – air loop
SBN – pillar without cape
SS – connection column
Following. – next ( loop )
p – loop
ssp – rear loop wall
*…* — repeat from the asterisk to the asterisk the specified number of times ( for example: * increase, 2 SBN * 4 = increase, 2 SBN, increase, 2 SBN, increase, 2 SBN, increase, 2 SBN ).

Ears
Take a blue yarn.
1 row – Amigurumi Ring of 6 SBN. Total number of loops 6.
2 row – 6 additives. Total number of loops 12.
3 row — * SBN, increase * 6. Total number of loops 18.
4 row – 18 SBN. Total number of loops 18.
Fold the part in half and tie both edges with the help of the SBN. Trim the thread and leave a long ponytail to attach the part to the product with it.

The sole paw sole ( tie 2 pcs )
Take a gray yarn.
1 row – Amigurumi Ring of 8 SBN. Total number of loops 8.
2 row – 8 additives. Total number of loops 16.
Complete the row using the SS. Trim the thread and leave a long ponytail to attach the part to the product with it.

Muzzle
Take a gray yarn.
1 row — Amigurumi Ring of 6 SBN. Total number of loops 6.
2 row – 6 additives. Total number of loops 12.
3 row — * SBN, increase * 6. Total number of loops 18.
4 row — * 2 SBN, increase * 6. Total number of loops 24.
5 row — * 3 SBN, increase * 6. Total number of loops 30.
Complete the row with the help of the SS and cut the thread.

Head and torso ( attach to the muzzle )
Attach a blue thread to the muzzle using the SS for the back wall of the loop.
On the 18th row do not knit columns into an arch of 6 VP, knit into each formed VP.
6 row — * 4 SBN per ssp, increase for ssp * 6. Total number of loops 36.
7 row — * 5 SBN, increase * 6. Total number of loops 42.
8 row – 42 SBN. Total number of loops 42.
9 row — * decrease, 5 SBN * 6. Total number of loops 36.
10 row — * decrease, 4 SBN * 6. Total number of loops 30.
11 row — * decrease, 3 SBN * 6. Total number of loops 24.
12 row — * decrease, 2 SBN * 6. Total number of loops 18.
13 row — * increase, 2 SBN * 6. Total number of loops 24.
14 row — * increase, 3 SBN * 6. Total number of loops 30.
15 row — * increase, 4 SBN * 6. Total number of loops 36.
16 row — * increase, 5 SBN * 6. Total number of loops 42.
17 row — * increase, 6 VP, skip 6 VP, increase, 6 SBN, increase, 6 SBN * 2. Total number of loops 48.
18 row – 48 SBN. Total number of loops 48.
19-24 row – repeat the 18th row. Total number of loops 48.
25 row — * decrease, 6 SBN * 6. Total number of loops 42.
26 row — * decrease, 5 SBN * 6. Total number of loops 36.
27 row — * decrease, 4 SBN * 6. Total number of loops 30.
Trim the thread.

Front paws
Fasten the blue thread in the loop of one of the 6 VP arches on the body and tie the SBN in a circle so that 14 loops are obtained. Next, knit on the spiral.
2 row – 14 SBN. Total number of loops 14.
3-5 row – repeat the second row. Total number of loops 14.
6 row – 7 ducks. Total number of loops 7.

Assembly
Sew your ears to your head and with the help of embroidered threads of black, sew the details of the muzzle as shown in the figure. Fill your head, front paws and body with a filler.

Rear paws
Fold the body so that the front legs are symmetrically to each other on both sides of the body.
Pass the thread in the center of the uninvited hole in the body and tighten as shown in the figure. It will result in two separate holes for the hind legs, each of which will consist of 14 loops.
Tie each hole separately using the SBN so that 16 loops ( 14 free loops and 2 loops at the lap connection ) are obtained. Next, knit 6 rows in a spiral using the SBN. Complete the row with the help of the SS and cut the thread. Knit the second paw according to the same scheme.

Tightly fill the body and hind legs with a filler.

Sew on one sole to each back paw using the thread tail left earlier. Sew the soles of the soles and the front walls of the hind legs. Trim the thread and refuel the tail.

Petelka
Pass the ribbon through the loop on the back of the bear. Tie a bow and then tie the ends.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Symbols:
vp — air loop
Satn — table without cape
ssn — table with nakid
connection. Art — connecting column

Step 1: The Basis of the Bag
Start working with 8 + 1 columns to get a width of 11 cm. Then turn and knit the Sat until you get a rectangle of the desired size. We recommend not making the bag too large, but stick to approximately this size: 11 x 25 cm

Row 1: Start knitting the Sat in a circle, adding 1 Sat in each of 4 angles. ( to add, connect two Satins to each corner column )
Rows 2-18: Continue knitting in a circle, in a spiral, until you reach the desired height of the bag.

Step 2: Combine the corners of the bag
Mark the 4 angles of the bag ( check the number of columns on each side of the bag ) in contrasting with the hook.

Enter the hook in the 2nd corner on the left ( left side of the bag ) and tie them together with 2 Sat. Do not knit tight! Next, knit the Satn to 2 corners of the bag on the right, repeating the — process, connect the two sides of the bag, injecting the hook into both corners and tying 2 Sat. Link to the left corner and complete the row. Complete the neighbor next to. Art.

Step 3: Pens
Attach the pens to the bag, sewing them to the knitted canvas of the so-called « running seam ». Wrap the yarn pens and fasten it with your hips. Art. Keep wrapping ( from left to right and from right to left ) and tie the soy. Art. until you cover the pens completely. Fasten the thread and hide the ends of the threads in the knitted canvas.

For the work to look complete, make a simple lining and sew it manually into your knitted bag.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.

Start

5 v.p. connect into a ring by performing SS in the first ch.
Row 1: Ch 3, ch 2, ch 3, (ch 3, ch 3) repeat 4 times, sl-st at the beginning of the row. You should get 5 arches from 3 vp. and 5 groups of 3 CHs.
2 rows: Knit SS to the first arch in which to tie: 3 ch, 2 ch, 3 ch, 3 ch, 1 ch, (3 ch, 3 ch, 3 ch , ch 1) knit in the next 4 arches, finish with SS.
3 rows: Knit SS to the first arch of ch 3, knit into it: 3 ch, 2 CH, 4 ch, 3 CH; then 1 RLS in the arch from 1 v.p. of the previous row, * (3 CH, 4 ch, 3 CH) in the next arch of 3 ch, 1 RLS in the arch of 1 ch previous row, repeat from * 3 more times, sl-st to beg of row.

Pull out the ends of the sprocket and put under the press.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.