Amigurumi Chick Crochet Pattern – All Free Amigurumi

Hello amigurumi lovers and beautiful visitors, I wanted to share the free amigurumi patterns for you here. In my article I will share 1 pattern and how to make it for you. At the end of my article, I will share amigurumi patterns that can generate ideas for you.

Materials:
1. YarnArt Jeans (50% cotton / 50% acrylic 50g/160m) yellow (67), blue (75), green (79), white (62), a little orange yarn for the beak and pink yarn for the cheeks
2. Filler (holofiber)
3. Hook 2.0 mm
4. Black half beads for the eyes 10 mm in diameter
5. Glue
6. Black sewing thread for decorating the muzzle
7. Thick needle for sewing details

Symbols:
k.a. – amigurumi ring;
c.p. – air loop;
w.p.p. – air lifting loop;
ss – connecting column;
sc – single crochet;
psn – half-column with a crochet;
sn – double crochet;
pr – increase (2 loops in 1);
dec – decrease (2 loops together);
zpp – rear half-loop;
ppp – front half loop

Legs (2 parts)
We start with a blue thread. Fill tightly as you knit.

We collect a chain of 5 ch. + 1 c.p.p.
We start knitting from the 2nd loop from the hook, we knit on both sides of the chain, forming an oval .
1: 4 sc, 3 sc in the last loop, on the other side of the chain: 3 sc, inc (12)
2: inc, 3 sc, 3 inc, 3 sc, 2 inc (18)
3: 1 sc, inc, 3 sc , (1 sc, inc) * 3, 3 sc, (1 sc, inc) * 2 (24)
4: 24 sc for STD
5-6: 24 sc (2 rows)
7: 2 sc, dec, (1 sc , dec) * 5, 5 sb (18)
8: 5 sb, 3 dec, 7 sb (15)
Change the thread to yellow.
9: we knit for STD 4 sbn, 3 dec, 5 sbn (12)
10-15: 12 sbn (6 rows) We cut the
thread and fasten it.

We knit the second leg in the same way, we finish the row by knitting an additional 4 sc.

We attach a blue thread to the first free half-loop of the 8th row and knit the top of the boot in a spiral for ppp.
1: 15 sc
2: 15 sl-st Cut the
thread, fasten.

Torso
From the second leg, we collect a chain of 6 ch,

16: 12 sc on the first leg, 6 sc on one side of the chain, 12 sc on the second leg, 6 sc on the other side of the chain (36)
17: (5 sc, inc) * 6 (42)
18: 14 sc, (1 sb, inc) * 3, 15 sb, (1 sb, inc) * 3, 1 sb (48)
19: (7 sb, inc) * 6 (54)
20-21: 54 sb (2 rows)
Change the thread to blue.
22: 54 sc
23: 54 sc per STD
Change the thread to green.
24: 54 sb for RFP
Change the thread to white.
25: (7 sc, dec) * 6 (48)
Change the thread to blue.
26:48 sbn
Change the thread to green.
27: 3 sc, dec, (6 sc, dec) * 5, 3 sc (42)
Change the thread to white.
28:42 sbn
Change the thread to blue.
29: (5 sc, dec) * 6 (36)
Change the thread to green.
30: 36 sbn
Change the thread to white.
31: 5 sb, dec, (10 sb, dec) * 2, 5 sb (33)
Change the thread to blue.
32: 33 sc
Change the thread to green.
33: (9 sc, dec) * 3 (30)
Change the thread to white.
34: 30 sc
Change the thread to blue.
35: 4 sc, dec, (8 sc, dec)*2, 4 sc (27)
Change the thread to green.
36: 27 sc
Change the thread to white.
37: (7 sc, dec) * 3 (24)
Change the thread to yellow.
38: 24 sb for RFP
39: 24 sb We cut the
thread, leaving a long end for sewing.

Head
We knit with a thread of the main color. Fill tightly as you knit.
1: 6 sc in KA (6)
2: 6 inc (12)
3: (1 sc, inc) * 6 (18)
4: 1 sc, inc, (2 sc, inc) * 5, 1 sc (24)
5: (3 sc, inc) * 6 (30)
6: 2 sc, inc, (4 sc, inc) * 5, 2 sc (36)
7: (5 sc, inc) * 6 (42)
8: 3 sb, inc, (6 sb, inc) * 5, 3 sb (48)
9-12: 48 sb (4 rows)
13: (7 sb, inc) * 6 (54)
14: 4 sb, inc, (8 sc, inc) * 5, 4 sc (60)
15-19: 60 sc (5 rows)
20: 4 sc, dec, (8 sc, dec)*5, 4 sc (54)
21: (7 sc, dec)*6 (48)
22: 3 sc, dec , (6 sc, dec)*5, 3 sc (42)
23: (5 sc, dec)*6 (36)
24: 2 sc, dec, (4 sc, dec)*5, 2 sc (30)
25 : (3 sc, dec) * 6 (24)
26: 1 sc, dec, (2 sc, dec) * 5, 1 sc (18)
27: (1 sc, dec) * 6 (12)
28: 6 dec (6)
We tighten the hole, hide the thread inside the part.

We make a tightening for the eyes.

To do this, we mark points 1 and 2 between 14 and 15 rows at a distance of 10 sc and points 3 and 4 between 15 and 16 next directly under points 1 and 2 (as shown in the photo).
Now we insert the needle into the head, fix the thread and bring it out at point 1, then we insert it into the head at point 3 and bring it out at point 2, we tighten the thread.
Again we insert the needle into the head at point 4 and withdraw it at point 1, we tighten the thread. We repeat this movement 2-3 times. We fix the thread, cut it and hide it inside the head.

The next step is to glue the eyes with a glue gun. Then with a white thread we embroider the whites of the eyes, with a black thread we embroider cilia and eyebrows.

Beak
We knit with an orange thread.
1: 6 sb in KA (6)
2: 6 sb
3: (1 sb, inc) * 3 (9)
Cut the thread, leaving a long end for sewing.

We sew the beak between 15 and 18 next to the head.

Cheeks (2 parts)
In KA we knit 2 ch, 10 dc, sl-st in the 2nd ch.
Cut the thread, leaving a long end for sewing.

Sew cheeks between 17 and 21 next to the head.
We embroider a smile with a black thread.

We make a crest .
We insert the needle at the bottom of the head, fasten the thread and bring it out at the top of the head in the amigurumi ring. Again we insert the needle into the head into the amigurumi ring, we bring out the thread at the bottom of the head, leaving a small loop at the crown. We fix the thread at the bottom of the head so that the loop does not run away.
We repeat this movement 2 more times.

Bow We form an amigurumi
ring, knit 3 ch, 3 dc, 3 ch, sl-st, 3 ch-p, sl-st, tighten.
We wrap the bow a little and sew it to the head.

Skirt

First, we knit a petticoat with a green thread.
To do this, we attach the thread to the last free half-loop of the 22nd row.
1: 3 ch, 1 sb in the same loop of the base, then in each loop we knit increases from dc to the end of the row, we finish the sl-st row in the 3rd ch.
2: Ch 3, inc from dc, (1 dc, inc from dc) * 53, finish the sl-st row in the 3rd ch.
Cut the thread, fasten.

Now we knit the top skirt with a blue thread.
To do this, we attach the thread to the last free half-loop of the 23rd row.
1: 3 ch, 1 dc in the same loop of the base, then in each loop we knit increases from dc to the end of the row, finish the sl-st row in the 3rd ch.
Cut the thread, fasten.

Collar
We knit a collar with a thread of green color. To do this, we attach the thread to the last free half-loop of the 37th row.
1: ch 1, 1 sc in the same base loop, 23 sc, finish the sl-st row in ch.
2: we knit for zpp: 1 ch, (1 s, 1 d, 1 s) in the same loop of the base, sl-st in the next loop, (1 pr, 1 d, 1 pr) in 1 loop, sl-st in the next loop, alternating to the end of the row. We finish the series with ss.
Cut the thread, fasten.

At this stage, we try on the decorated head to the body and begin to sew. As we sew, we stuff the neck tightly so that the head does not dangle under its own weight.

Wings (2 parts)
We knit with a thread of the main color. We do not fill.
1: 6 sc in KA (6)
2: (1 sc, inc) * 3 (9)
3: 9 sc
4: 1 sc, inc, (2 sc, inc) * 2, 1 sc (12)
5: 12 sc
6: (1 sc, inc) * 6 (18)
7-14: 18 sc (8 rows)
15: (1 sc, dec) * 6 (12)
16: (1 sc, dec) * 4 (8)
We fold the part in half and connect the edges, knitting 4 sc.
We cut the thread, leaving a long end for sewing.

With the help of pins, we try on the wings to the body and sew at the level of the 35th row.

Feel free to tag me (@freeamigurumii) in your photos on Instagram or Facebook if you’d like!

All Finished.